modelling using maxsurf

Discussion in 'Software' started by bam_yat, Nov 24, 2011.

  1. bam_yat
    Joined: Sep 2011
    Posts: 25
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: malaysia

    bam_yat Junior Member

    Hi,

    i need help on how to create the fwd part of ship, example like bulwark. i don't have any marker point at the position. if i add surface, then how to make it tilt to become a perfect shape of hull?
     
  2. bhnautika
    Joined: Feb 2006
    Posts: 849
    Likes: 55, Points: 38, Legacy Rep: 571
    Location: australia

    bhnautika Senior Member

    Bam yat create a new surface then use the bond surface command with the “strict tangency”. This enables the two surfaces to act as one.
     
  3. Alvarocotaquisp
    Joined: Nov 2011
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Peru

    Alvarocotaquisp Junior Member

    Hi frienddd

    hi friend im alvaro from Peru. do you have some tutorial to learn to use a design i Maxsurf. my msn is alvarocotaquispe@gmail.com ill thank to you so much.
     
  4. bam_yat
    Joined: Sep 2011
    Posts: 25
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: malaysia

    bam_yat Junior Member

    Thank you bhnautika.
     

  5. bhnautika
    Joined: Feb 2006
    Posts: 849
    Likes: 55, Points: 38, Legacy Rep: 571
    Location: australia

    bhnautika Senior Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.