What about jigs?

Discussion in 'Metal Boat Building' started by Steve32, Feb 2, 2010.

  1. Steve32
    Joined: Feb 2010
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: canada

    Steve32 Junior Member

    What are you guys using for jigs when building smaller boats say 14'-18' fishing boats that have ribs and not the big frame work to hold it in place during manufacturing!
     
  2. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    Methods vary according to materials used and hull type. Please be more specific.
     
  3. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    The method determines the type of jig, or if you even need one.
     
  4. Asleep Helmsman
    Joined: Jul 2008
    Posts: 241
    Likes: 7, Points: 18, Legacy Rep: 62
    Location: Republic of Texas

    Asleep Helmsman Senior Member

    If you are using "ribs" than why do you need jigs?
    Stringer should keep your ribs in place.
     
  5. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Steam bent frames need a jig.
     
  6. Asleep Helmsman
    Joined: Jul 2008
    Posts: 241
    Likes: 7, Points: 18, Legacy Rep: 62
    Location: Republic of Texas

    Asleep Helmsman Senior Member

    You're absolutely correct, as do laminated ones.

    I erroneously assumed he meant to hold the planks.

    It just goes to show you, doesn't it?
     
  7. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    I think he needs to narrow the question. Also, we all assumed he is asking about wooden boats.
     

  8. Rampager
    Joined: Mar 2004
    Posts: 24
    Likes: 1, Points: 0, Legacy Rep: 33
    Location: Canada

    Rampager Junior Member

    Im going to assume since this is in the metal boats section hes asking about metal boats

    Aluminum moves alot when being welded so typically anything that can be done to hold things "true" will help. Boats on the larger end of your scale frequently use a metal frame which the bottom is bolted to in various places prior to welding.

    I cant help you with suggestions for a riveted hull as I am not very familiar with their fabrication.

    More details on your end may help get better answers here
     
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.