Michlet/Godzilla availability

Discussion in 'Software' started by KalleA, May 5, 2009.

  1. marshmat
    Joined: Apr 2005
    Posts: 4,127
    Likes: 149, Points: 63, Legacy Rep: 2043
    Location: Ontario

    marshmat Senior Member

    Hi tomac,
    You cannot manually set the hull beam in Michlet. That would result in an "over-constrained" problem with conflicting parameters. You set the nondimensional offsets, displacement, waterline length, and draught (in that order). Michlet then computes the waterline beam from these values.

    It looks like this:
    # ============================ FIRST HULL ==============================
    # Offsets
    # Displacement Volume (cubic metres)
    # Length (metres)
    # Draft (metres)

  2. tomac
    Joined: Jul 2009
    Posts: 19
    Likes: 1, Points: 0, Legacy Rep: 15
    Location: Stockholm

    tomac Junior Member

    Ok Thanks!
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.