mercury black max

Discussion in 'Powerboats' started by erik80, Sep 21, 2003.

  1. erik80

    erik80 Guest

    Have a mercury 200hp black max with a broken drive shaft.
    The drive is marked NoseCone. Is this nor original?
    Where can I get a new drive shaft?
    The boat it it sitting on is told to be a Barracude 16 feet.
    I have not had anny sucess finding annything about this boat on the net. Is there someone that have heard about it? (it is a V-hull racing boat).
    Thanks
     
  2. gonzo
    Joined: Aug 2002
    Posts: 16,803
    Likes: 1,721, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Nosecone is a high performance accesory. Do you have the part number of the shaft? If not measure the length, diameter and spline number.
     
  3. erik80

    erik80 Guest

    nosecone

    The lenght is 815mm, diameter 22,2mm and there are 8 splines.
    Do nosecone have a web site. When searching i only find a company producing truck fronts. Is this the same company?
    Whould there be much different in performance if i use a standard drive?
    Thanks
     

  4. Erik80

    Erik80 Guest

    Still havn't found out which company NoseCon is and how to get in touch with them? Annyone?
    Erik
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.