Maxsurf v13: Producing a table of offsets

Discussion in 'Software' started by ldigas, Mar 9, 2011.

  1. ldigas
    Joined: Feb 2011
    Posts: 187
    Likes: 4, Points: 18, Legacy Rep: 60
    Location: Zagreb, Croatia

    ldigas Senior Member

    Hello everyone,

    sorry to be a bit of a bother with this, but I'm having a spot of trouble and the manual's giving me no clues. I'm sure it's some simple thing, as those are often most difficult to spot.

    I have a hull which consists of several surfaces, and wish to produce a table of offsets at the intersections of sections with waterlines and buttocks (defined in "Grid Spacing"). Would also be nice if it could include the "knuckle" points at feature lines.

    I've messed around with "Calculate Offsets" option a little, but cannot seem to see what I must do to get the above. Is it at all possible?

    If it is, (or even more, if it isn't) I'd appreciate every suggestion how to work around this?

    Best regards,
    Luka
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.