Maxsurf Modeling

Discussion in 'Software' started by RUA, Sep 3, 2020.

  1. RUA
    Joined: Sep 2020
    Posts: 1
    Likes: 1, Points: 3
    Location: UK

    RUA New Member

    I am doing stability calculation for a passenger vessel. I am modelling in Maxsurf. I have made the model in Rhino and then imported in Maxsurf. Now I have the following questions.
    1. Do I need to design all the decks for stability calculation?
    2. Do I need to trim the surfaces in the window and door positions?
    3. Do I need to draw the bulkheads?
    4. Do I need to draw the superstructure?
    5. Which one should I consider as margin line? Is it the 76 mm below from the Maindeck or anything else?
    6. Which structural parts I should obviously include in case of modeling for stability analysis?
    7. How much detail drawing is required for analysis?

    I will really appreciate if you help me. Thanks a lot.
    marufuddin0 likes this.
  2. Dr34m3r
    Joined: Mar 2012
    Posts: 161
    Likes: 4, Points: 18, Legacy Rep: 10
    Location: Europe

    Dr34m3r Senior Member

    Seems like you are student, its more of the question to your teacher than this forum. Othersie google stability booklet. you will find few.
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.