ROBOSAIL Open 40 Racer

Discussion in 'Sailboats' started by Fonx, Dec 15, 2007.

  1. Fonx
    Joined: Nov 2007
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Estonia

    Fonx New Member

  2. Eric Sponberg
    Joined: Dec 2001
    Posts: 2,021
    Likes: 248, Points: 73, Legacy Rep: 2917
    Location: On board Corroboree

    Eric Sponberg Senior Member

    Interesting design. To answer your question, no, a properly designed and engineered mast should not break. Any mast, free-standing or stayed, is designed to the maximum righting moment of the boat, plus a safety factor. As stronger and stronger wind blows, the boat heels more and more until it reaches that heel angle where the righting moment is the greatest, usually somewhere between 45 and 60 degrees of heel. Any more wind and the boat will continue to heel over, but the righting moment is less--eventually goes back to zero at what is known as the vanishing angle of stability (AVS) or also known as the range of stability. So for any given boat design, there is always a maximum load that the boat will ever see, at this maximum righting moment. The more sail area there is, the less wind speed is required to reach max. heeling moment, but that max. heeling moment does not change. It is easy to calculate, so it is easy to find the maximum load for the rig. Design accordingly, and the mast will behave properly and last a long time.

    Eric
     
  3. kenJ
    Joined: Jul 2005
    Posts: 349
    Likes: 5, Points: 0, Legacy Rep: 56
    Location: Williamsburg, VA

    kenJ Senior Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.