Marine Plywood and Timber for Sale

[shu]

This was a boat project my father, John Shumaker, and I were going to do together, but his deteriorating health prevented it from being built. He died almost 2 years ago, and I am finally willing to part with the materials.

Meranti plywood 4' x 8' sheets, BS1088:
23 sheets of 6 mm - 5-ply
24 sheets of 9 mm - 7-ply
22 sheets of 12 mm - 9-ply
12 sheets of 4 mm - 3-ply

Okoume plywood 4' x 8' sheets, BS1088:
4 sheets of 3 mm - 3-ply
7 sheets of 4 mm - 3-ply
4 sheets of 6 mm - 5-ply

About 360 board ft of clear Port Orford cedar
About 60 board ft of clear purple heart
2 large African or Honduras mahogany boards: 1.75" x 18.75" x 133" and 1.56" x 20.7" x 111"
A 2'x8' sheet of 3" thick 5 pcf PVC structural foam
A 2'x8' sheet of 1" thick 5 pcf PVC structural foam
All wood properly stored out of weather.

Selling for half of current market price: all of it for $5,000.
You may buy all the lumber, and/or all the plywood, but I will not piece it out.

 

[shu]

No takers on the whole package. I've decided to keep the timber, but the plywood is available, and I'm willing to sell portions of it. Prices shown are approximately half of current on-line prices.
Meranti plywood 4' x 8' sheets, BS1088:
23 sheets of 6 mm - 5-ply - $25 per sheet
24 sheets of 9 mm - 7-ply - $35 per sheet
22 sheets of 12 mm - 9-ply - $44 per sheet
12 sheets of 4 mm - 3-ply - $17 per sheet
2 large African or Honduras mahogany boards: 1.75" x 18.75" x 133" - $300 and 1.56" x 20.7" x 111" - $225
A 2'x8' sheet of 3" thick 5 pcf PVC structural foam - $180
A 2'x8' sheet of 1" thick 5 pcf PVC structural foam - $60

 

[Tcane123]

Would you ship the PVC foam? Any idea of the brand?

 

[shu]

I don't know the brand. I suspect Airex, but I could find no record. It was purchased from Fiberglass Hawaii (Ventura location) about 12 - 15 years ago. It is still in it's original shipping packaging, so I could ship if you pay for shipping.

 

[Tcane123]

Where are you located?

 

[shu]

Southern California; North San Diego County; little town called Bonsall.

 

[shu]

This is starting to move. Here is what I have left:
Meranti plywood 4' x 8' sheets, BS1088:
14 sheets of 6 mm - 5-ply - $25 per sheet
15 sheets of 9 mm - 7-ply - $35 per sheet
19 sheets of 12 mm - 9-ply - $44 per sheet
12 sheets of 4 mm - 3-ply - $17 per sheet
2 large African or Honduras mahogany boards: 1.75" x 18.75" x 133" - $300 and 1.56" x 20.7" x 111" - $225
A 2'x8' sheet of 3" thick 5 pcf PVC structural foam - $180
A 2'x8' sheet of 1" thick 5 pcf PVC structural foam - $60

 

[Tcane123]

I'd love to grab that foam from you but I think shipping to Georgia would be more than it would cost here

 

[shu]

I won't argue with that.

 

[shu]

Update on what is still available. Here is what I have left:
Meranti plywood 4' x 8' sheets, BS1088:
6 mm - 5-ply - $25 per sheet - NONE left
13 sheets of 9 mm - 7-ply - $35 per sheet
18 sheets of 12 mm - 9-ply - $44 per sheet
12 sheets of 4 mm - 3-ply - $17 per sheet
2 large African or Honduras mahogany boards: 1.75" x 18.75" x 133" - $300 and 1.56" x 20.7" x 111" - $225
A 2'x8' sheet of 3" thick 5 pcf PVC structural foam - $180
A 2'x8' sheet of 1" thick 5 pcf PVC structural foam - $60

 

[shu]

Further update on what is still available. Here is what I have left:
Meranti plywood 4' x 8' sheets, BS1088:
6 mm - 5-ply - $25 per sheet - NONE left
8 sheets of 9 mm - 7-ply - $35 per sheet
18 sheets of 12 mm - 9-ply - $44 per sheet
7 sheets of 4 mm - 3-ply - $17 per sheet
2 large African or Honduras mahogany boards: 1.75" x 18.75" x 133" - $300 and 1.56" x 20.7" x 111" - $225
A 2'x8' sheet of 3" thick 5 pcf PVC structural foam - $180
A 2'x8' sheet of 1" thick 5 pcf PVC structural foam - $60

 

[Timothy Helgeson]

Do you still have the mahogany for sail?
I have a cold molded ocean race boat and need to scarf in a new stem