looking for tribon tutorials

Discussion in 'Software' started by rohinit, Sep 2, 2009.

  1. rohinit
    Joined: Sep 2009
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: india

    rohinit New Member

    I have started learning tribon, can any one pronide me basic design tutorial kind of thing.
    My e-mail is rohinit.raj@rediffmail.com
     
  2. zeroname
    Joined: Oct 2008
    Posts: 276
    Likes: 5, Points: 0, Legacy Rep: 90
    Location: Europe

    zeroname Naval Architect

    hy

    as you are from india. i think u can check this link

    http://www.aveva.com/region.php?location=27

    You can contact with them for purpose of training.
    And to learn Tribon.. big job.. must need training. In india AFA i know , there is also some local tribon training centre.

    Thanks
     
  3. AYM910
    Joined: Sep 2009
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ukraine

    AYM910 Junior Member

    Hi
    I used Tribon 10 years, if you have questions please ask me.
     
  4. zeroname
    Joined: Oct 2008
    Posts: 276
    Likes: 5, Points: 0, Legacy Rep: 90
    Location: Europe

    zeroname Naval Architect

    can u tell how i can import maxsurf design file to tribon and then do hydrostatic calculations and surface create?
     
  5. AYM910
    Joined: Sep 2009
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ukraine

    AYM910 Junior Member

    Before you must create surface in "Surface & Compartment". There is import file (. SAT). I did it from Rhino. But be careful Tribon work badly with imported file. if you create surface in "Lines" or "Surface & Compartment" it be better.
     

    Attached Files:

  6. pablitoo81
    Joined: Oct 2009
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Poland

    pablitoo81 New Member

    Hi AYM910
    I am only recently trying to learn Tribon but without any training or user guide it is most impossible.Can you help me?..I will be grateful for any help.
    Best Regards
     
  7. AYM910
    Joined: Sep 2009
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ukraine

    AYM910 Junior Member

    Hi pablitoo81
    If you have any questions about "Tribon" please ask me. Don't feel shy.
    Give me your email and i will send you tutorial for Tribon
     
  8. pablitoo81
    Joined: Oct 2009
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Poland

    pablitoo81 New Member

    Hi AYM910
    My email pablitoo24@wp.pl
    Thank you very much for help :)..If I had some questions of course I will be asking.
    Best Regards
     
  9. jjchavez
    Joined: Oct 2009
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 4
    Location: -----

    jjchavez New Member

  10. superdongji
    Joined: Mar 2009
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: china

    superdongji Junior Member

    i think black background is good for your eye
     
  11. ca10mka
    Joined: Apr 2010
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: newcastle

    ca10mka New Member

    Hi,
    I need to devide the ship design in tribon into small section and find the sectional area of each one, and use it to find the added mass, can any one help with the tibon part.
    I have got the basis ship design in tribon

    thank you
    my email is: harmomo@hotmail.com
     
  12. tomazz
    Joined: Apr 2008
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Lithuania

    tomazz New Member

    Hello AYM910,
    I'm also interesting in tribon and have no tutorial for it. If you can, please send me a copy to tomasuas@gmail.com
    thank you
    and best regards
     
  13. shehabjahaji
    Joined: Mar 2008
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: bangladesh

    shehabjahaji New Member




    hi AYM910

    i'm a student and learnig tribon initial design_form recently.but i don't know the actual meaning and use of curves given there.these curves definitions r
    given below:

    a.half siding curve

    b.tangent curve

    c.ecentricity curve

    d.virtual stern

    e.vitual tangent curve

    f.phantom stern

    plz help me wid ur opinions on these lines and give me a tutorial on tribon M3 initial design_form so dat i can start my project.

    thank u
    shehab
    email: shehab_jahaji@yahoo.com
     
  14. mbaghyarajan
    Joined: Jun 2010
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: INDIA

    mbaghyarajan Junior Member

    surface and compartment doubt

    how to trim a surface in surface and compartment module which is projecting out of the hull
     

  15. tahtoh25
    Joined: Oct 2010
    Posts: 15
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Alexandria -Egypt

    tahtoh25 Junior Member

    Dear Sir,

    Am a naval architect from Egypt and its not easy to find any software like tribon here easy could you inform me from where can i download that Trbion Free

    Thanks
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.