23'6" Molds, Parts, Hull, Tanks, Everything (sold)

I have a 23'6', 8'3" Beam, Hull & Cap mold, Console, Leaning Post, there is a new hull in the mold with 85gal fuel tank, plumbing, wire chase's, fish box. I have all the patterns for Transom, Bulkheads etc. Console mold with console not pulled, Console Windshield's, leaning post mold, leaning post with Alu frame, electronics box, 2 new extra 85 gal fuel tanks. All the parts to assemble this first boat are done except a cap. I'm located in South East Alabama, between Montgomery & Dothan. $ 8500.00. OBO, Moving must sell ASAP !

This boat will float in 10" of water, 8' square deck area behind the leaning post, Self Bailing deck, 13 1/2 degree dead rise, I have built this hull as Center Console, Deck Boat, Cuddy Cabin, Pilot House, I/O or O/B Power, power with a 135hp up to 300hp, with motor hung on transom or bracket, with a 225 mercury, 85 gals of fuel, 6 people on board it will cruise at 58 mph & still be the Driest boat you'll ever be on !!!

There are so many extras for this package, if its for this mold/boat it's included. All of the mold surfaces are in perfect condition & are protected with a part still not pulled. Note: some of the mold bracing will need to be redone.

Possible delivery into FL with 50% paid deposit & $ 850.00 delivery fee.