1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

Lake and River Molds for sale

Discussion in 'Boat Molds' started by Blackhawk, Jul 25, 2004.

  1. Blackhawk
    Joined: Jul 2004
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SoCal

    Blackhawk Junior Member

    24' Deep V Mold

    The molds for a 24' Deep V offshore cuddy cabin hull and deck molds in excellant condition, e-mail for pic's and spec. sheet

    BlackhawkCN@aol.com
     
    Last edited: Jul 28, 2004
  2. AVENGER BOATS
    Joined: Aug 2004
    Posts: 7
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: NEW ORLEANS,LA

    AVENGER BOATS Junior Member

  3. Blackhawk
    Joined: Jul 2004
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SoCal

    Blackhawk Junior Member

    Boat Mold List

    (1) 24' offshore shore cuddy cabin cruiser
    (2) 21' V bottom open bow
    (2) 21' V bottom closed bow
    (1) 20' V bottom closed bow
    (1) 20' Mod VP closed bow
    (1) 19' Shovelnose Hydro
    (1) 19' Picklefork Tunnel Cat
    (2) 18' V bottom closed bow
    (2) 17' Mod VP closed bow
    (1) 16' V bottom closed bow
    (1) 18’ V bottom bubble deck
    (1) 18’ Mod VP closed bow
    (1) 22’ Mod VP open bow

    For pricing please call or E-mail
    BlackhawkCN@aol.com
    (760) 868-4423
     
    Last edited: Aug 24, 2004
  4. AVENGER BOATS
    Joined: Aug 2004
    Posts: 7
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: NEW ORLEANS,LA

    AVENGER BOATS Junior Member

    Blackhawk can you plz send pics ty
     
  5. Bob Hostetter
    Joined: Aug 2004
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SO California

    Bob Hostetter New Member

    I would like additional information on the 19' tunnel hull mold that you have listed. You can contact me directly at Mtrclass@aol.com

    Thanks,

    Bob
     
  6. Blackhawk
    Joined: Jul 2004
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SoCal

    Blackhawk Junior Member

    24' Deep V cuddy cabin

    Here are some pic's of the 24' deep V, the owner wanted just a bare hull and finish the rest himself. I took these pic's a few years back and talked to him in March 04, he said he still has the boat and loves it.
     

    Attached Files:

  7. Blackhawk
    Joined: Jul 2004
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SoCal

    Blackhawk Junior Member

    Another pic
     

    Attached Files:

  8. Blackhawk
    Joined: Jul 2004
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SoCal

    Blackhawk Junior Member

    Here is a pic of the 20' Mod VP boat finished.
     

    Attached Files:

    • 6.JPG
      6.JPG
      File size:
      40.8 KB
      Views:
      777
  9. JEM
    Joined: Jan 2004
    Posts: 299
    Likes: 3, Points: 0, Legacy Rep: 38
    Location: Greensboro, NC

    JEM Senior Member

  10. gfinishline
    Joined: Oct 2004
    Posts: 16
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Havasu

    gfinishline Junior Member

    Thanks for sending me some photos! I thought you wanted to sell molds. The 24' looks like a loser, the 'Bahner' looks OK. I would like photos of the 21's (molds) and prices. Thank you in advance George
     
  11. Blackhawk
    Joined: Jul 2004
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SoCal

    Blackhawk Junior Member

    George thanks for slamming me WTF! and the 24' looks like a loser! well some people happen to like 24' deep V offshore cuddy cabin's.
     
  12. gfinishline
    Joined: Oct 2004
    Posts: 16
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Havasu

    gfinishline Junior Member

    It sits low on the trailer because it is not a deep V. It does have an unusual deck style and looks odd. When I spoke with you, your comments were " bring your trailer out here and pick these up". "I'm just about giving them away". I said the early Ultras were Bahners and you said they were not. The pix you sent (a week later) show a BAHNER 21' boat on a trailer, in front of a house. The price $ 4000.00 each, is not in line with molds that have been sitting uncovered out in a field, for an untold amount of time. I do know what it takes to build plugs and molds, and I did not try to 'slam' you. I stated what others have said to me in private messages. I'm sorry you are stuck with those old broken molds, but I am ready with cash, and I am looking for molds to build boats, not trying to revive the dead. Your other molds may be in a better condition, but the one's you sent pix of are not in any shape to use. One of them has broken frame work and no wheels, how twisted is it? (laying out in a field)
     

  13. Cowboy_Mike
    Joined: Jul 2009
    Posts: 16
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: California

    Cowboy_Mike Junior Member

    Hi, I am interested in the hulls. You told me to call you This am. I had no luck. Must be on the water enjoying. I would be! email me again, or call my cell. I left it on your answering machine.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.