Kicker bracket installation

Discussion in 'Powerboats' started by Giterdone, Aug 16, 2008.

  1. Giterdone
    Joined: Aug 2008
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Nanaimo BC

    Giterdone New Member

    Hello boaters on the other side of the boarder. I have a 1984 Larson Nantucket Express 19 1/2' with outboard power. What I need to know is what is the best and simplest method to install a kicker bracket:?: The problem I see is that on each side of the transom it is filled with flotation foam about 10 - 12" thick and covered with fiberglass. Do I have to cut out all the foam and fiberglass to get at the transom for mounting bolts:?: Or is there an easier way? I'd really appreciate some input on this before I make a real mess and open up a big can of worms. Thanks in advance guys.:confused:
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.