Jushi glass fabrics

Discussion in 'Materials' started by Pablo91, Feb 17, 2020.

?

Do you recommend Jushi glass?

  1. Yes

  2. No

Results are only viewable after voting.
  1. Pablo91
    Joined: Apr 2019
    Posts: 1
    Likes: 0, Points: 1
    Location: Poland

    Pablo91 New Member

    Hello All,

    I would like to ask you about your experience and opinion about Jushi glass?
    I was using it in the past and I remember that quality was low, the glass was hard to cut and was printing a lot through gelcoat than its alternative glass.
     
  2. ondarvr
    Joined: Dec 2005
    Posts: 2,118
    Likes: 192, Points: 63, Legacy Rep: 506
    Location: Monroe WA

    ondarvr Senior Member

    Jushi is a major suppler, and makes good products. It’s been a long time since they were considered an inferior product.

    It comes down to the exact type of glass you’re looking for and where you live as to what other products are available. Smaller suppliers may be able to provide a product that better meets your needs if you have specific requirements.

    Print is a result of the resin shrinking. While certain types of glass (woven-stitched) do print differently, it still comes back to the resin choice.
     
    MassimilianoPorta likes this.
  3. KD8NPB
    Joined: Mar 2018
    Posts: 73
    Likes: 11, Points: 8
    Location: South Carolina

    KD8NPB Junior Member

    Jushi is fine.

    Print through, easiest solution? Stop using woven roving, except behind coring. Most US manufacturers use 0/90 3610 material for hulls, typically mixed with some +/- 45 1708 in some areas.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.