Help with PRM 302D Gearbox

Discussion in 'Diesel Engines' started by rich99uk, Jun 11, 2015.

  1. rich99uk
    Joined: Jan 2006
    Posts: 48
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: portsmouth

    rich99uk Junior Member

    Hi all,
    I have a prm 302d pretty much same as 402d and 500. I have a slight oil leek from one of the end caps on the gearboxs the buts up to the bell housing.
    There is three end caps there. Input shaft oil o ring and oil seal housing / output shaft end cap with oil o ring. And the lay shaft end cover. with oil o ring
    The one i am having problems with is the Lay shaft Oil Seal and cover.
    The other two o ring oil seal endcaps i can pop off with a flat bladed screw driver.
    The Layshaft end cap there does not seem to be room to put flat blade in and pop off.
    Anyone got any ideas ?
    I really dont want to split gearbox as i only just painted it:(
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.