Iso For Scantling Calcs

Discussion in 'Boat Design' started by S Hondros, Apr 2, 2006.

  1. S Hondros
    Joined: Oct 2003
    Posts: 29
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Greensboro, NC

    S Hondros Carolina Flare

    I was wandering if there were any iso programs of some sort that would allow you to enter your boats data and perform the scantling calcs. I am asking this b/c i have done them by hand already and would like to see if there are any major differences in the calcs.

    thanks
     
  2. Guillermo
    Joined: Mar 2005
    Posts: 3,644
    Likes: 189, Points: 63, Legacy Rep: 2247
    Location: Pontevedra, Spain

    Guillermo Ingeniero Naval

    You have CE-Pro (http://www.ce-pro.eu.com/) but you have to be careful when using ISO 12215, as this norm is not still fully accepted.
     
  3. S Hondros
    Joined: Oct 2003
    Posts: 29
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Greensboro, NC

    S Hondros Carolina Flare

    is that software availiable for download?
     

  4. Guillermo
    Joined: Mar 2005
    Posts: 3,644
    Likes: 189, Points: 63, Legacy Rep: 2247
    Location: Pontevedra, Spain

    Guillermo Ingeniero Naval

    You have to contact the guys.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.