Hi Folks!
Am a newbie here and I need some help with a detailed design in CAD for a commercial deck barge with the Specifications below.
BARGE TYPE: DECK BARGE
CLASS: ABS
LOA: 250 FEET
BREADTH (MOLDED): 80 FEET
DEPTH (MOLDED): 16 FEET
DWT: 5,300 TONS APPROX.
GRT: 2305
NRT: 692
DECK STRENGTH: 15 TONS / M2
SCANTLINGS: TOP 18 MM / SIDE 12 MM
NO. OF BULKHEADS: 2 LONGITUDINAL / 7 TRANSVERSE
NO. OF MANHOLES: 24
NO. OF STANCHIONS: 23 AT STARBOARD / 23 AT PORT SIDE
BALLASTABLE: NA
WELDING: DOUBLE CONTINUOUS WELD (FULL WELD CONSTRUCTION)
NUMBER OF TANKS: 24 (INTERNALLY COATED WITH TAR EPOXY PAINT, EACH TANK FITTED WITH 1 MANHOLE AND 1 VERTICAL LADDER)
NUMBER OF BOLLARDS: 8 (4 SETS TWIN BITT TYPE EACH SIDE)
ANCHOR: 1 X 900 KG ANCHOR C/W A MANUAL ANCHOR WINCH
TYRE FENDER: SUFFICIENT PIECES OF TYRE FENDER ALL AROUND
TOWING BRACKETS: 2 SETS EACH AT BOW AND STERN C/W CHAFFING
PAINTING: JOTUN PAINTS FOR EXTERNAL HULL & INTERNAL
ANODES: FITTED FOR HULL EXTERIOR CORROSION PROTECTION
DECK: 16 MM.
I will like to get opinions from anyone who can provide me the design in CAD or suggest a resourceful website for this exercise. Please see the attached photo for reference.
Thanks in advance!
Am a newbie here and I need some help with a detailed design in CAD for a commercial deck barge with the Specifications below.
BARGE TYPE: DECK BARGE
CLASS: ABS
LOA: 250 FEET
BREADTH (MOLDED): 80 FEET
DEPTH (MOLDED): 16 FEET
DWT: 5,300 TONS APPROX.
GRT: 2305
NRT: 692
DECK STRENGTH: 15 TONS / M2
SCANTLINGS: TOP 18 MM / SIDE 12 MM
NO. OF BULKHEADS: 2 LONGITUDINAL / 7 TRANSVERSE
NO. OF MANHOLES: 24
NO. OF STANCHIONS: 23 AT STARBOARD / 23 AT PORT SIDE
BALLASTABLE: NA
WELDING: DOUBLE CONTINUOUS WELD (FULL WELD CONSTRUCTION)
NUMBER OF TANKS: 24 (INTERNALLY COATED WITH TAR EPOXY PAINT, EACH TANK FITTED WITH 1 MANHOLE AND 1 VERTICAL LADDER)
NUMBER OF BOLLARDS: 8 (4 SETS TWIN BITT TYPE EACH SIDE)
ANCHOR: 1 X 900 KG ANCHOR C/W A MANUAL ANCHOR WINCH
TYRE FENDER: SUFFICIENT PIECES OF TYRE FENDER ALL AROUND
TOWING BRACKETS: 2 SETS EACH AT BOW AND STERN C/W CHAFFING
PAINTING: JOTUN PAINTS FOR EXTERNAL HULL & INTERNAL
ANODES: FITTED FOR HULL EXTERIOR CORROSION PROTECTION
DECK: 16 MM.
I will like to get opinions from anyone who can provide me the design in CAD or suggest a resourceful website for this exercise. Please see the attached photo for reference.
Thanks in advance!
