How to video series (Race boat Teardown)

Discussion in 'Powerboats' started by Ravencrew, Mar 14, 2009.

  1. Ravencrew
    Joined: Feb 2008
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    Ravencrew Junior Member

    We thought we would make a series of videos explaining what goes on behind the scenes of the races. We're tearing apart a race boat and putting it back together. Jesse has over 12 years of racing and repair experience so he's pretty much up to speed. No pun intended! If you have any questions or comments please post them on the video. Will try and answer them as we tape more videos. Here is are first, By no means are we producers and professional cameramen. Hope you like it!

    Here is are first video:




    Here is the second video:

     
  2. Ravencrew
    Joined: Feb 2008
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    Ravencrew Junior Member

    Grate and Ride Plate

    This one is short:

     
  3. Ravencrew
    Joined: Feb 2008
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    Ravencrew Junior Member

    Videos 4 and 5

    Video 4 Revisiting the ride plate




    Video 5 Bottom and bondo

     
  4. Ravencrew
    Joined: Feb 2008
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    Ravencrew Junior Member

    video #6 Bondo final stage:

     

  5. Ravencrew
    Joined: Feb 2008
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    Ravencrew Junior Member

    here is part 7: Chrunyk Performance Nozzle:

     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.