How to find someone to design a boat.

SovereignFinn

Junior Member
Joined
Oct 28, 2026
Posts
11
Reaction score
2
Location
NY USA
In this post is a photo Ben Kerr's prohibition rumrunner "Martimas". I am rather in love with this boat, and for a while have been looking to find someone to design a copy. I was hoping for an "idiot proof" design, meaning a metal hull that can bump a beach without cracking like fiberglass, a big engine for speed close to its ancestor's, and survival possibility in the winter Atlantic ;). That doesn't mean it has to be stable, just it has to survive without sinking. Any help would be appreciated, and I know I don't know everything, you don't need to tell me I am stupid. If you could find designers/Naval architects, other images of or information concerning the Martimas or other fast displacement hulls of the period, it would be much appreciated. Thank you!
 

Attachments

  • Martimas.webp
    Martimas.webp
    66 KB · Views: 70
Last edited:
See if you can find a lines plan, otherwise it's a wild guess. Online or museums perhaps?
935cd905d9af73260fc058695d0318e0.webp
 
Copy a proven design.
One with a history of hitting all the traits you're looking for.
Most first time builders miss the value of this entirely.
Don't overlook the value of building to a proven design.
Oh, and you'll likely have to pay good money for the design,
it's worth 10X as much as what you'll actually pay.

Good project.
Of course you're going to have a harder time finding steel hull plans.
 
Hi @SovereignFinn
Welcome to the forum
Although I have not located the original plans for Martimas, I have gathered reference material on comparable motor cruisers from the same period. Combined with my knowledge of the proportions and hull forms used at the time, this provides a sound basis for developing your boat.
I have extensive experience in designing recreational and commercial vessels under 24 meters, including a strong background in metal hull design. This allows me to combine the character of a period boat with practical construction details and a hull form suited to its intended use.
Using the photograph as a reference, the visible hull above the waterline can be designed to have exactly the same side profile as Martimas, while the underwater hull form can be developed to best meet your Statement of Requirements.
We can choose a round-bilge or a chined hull, depending on the construction method, intended performance and appearance you prefer. These choices can be defined by you or developed together as the design progresses.
The result would be a new design inspired by Martimas, preserving its distinctive appearance while being tailored to your needs.
Contact me, if you find it appropriate, through a pm or through my email: tansl02@hotmail.com
 
...If you could find designers/Naval architects, other images of or information concerning the Martimas or other fast displacement hulls of the period, it would be much appreciated. Thank you!

This is relatively straightforward for any naval architect.
But it may be better to select one more suited to designing these types of vessel. Forum member @Tad would be my first choice because he is also in your part of the world.

... That doesn't mean it has to be stable, just it has to survive without sinking. ..
Everyboat must be stable, no matter what. Otherwise you are going to sea, never knowing if you'll ever return.

....meaning a metal hull that can bump a beach without cracking .... and survival possibility in the winter Atlantic ...

So that alone may select the choice of material. Working in cold climes, consistently means the material must have good fracture toughness across a wide range of temps.
This means, a grade of steel that is suitable for low temps like D or E, or aluminium.
 
Those rum runners went much faster than displacement speed.

View attachment 210829
From what I can tell, the Martimas was an over-engined displacement hull. It was quite seaworthy and still capable of high speed in high seas, because it could pass its hull speed without getting up on a plane just through brute force. That's basically what I want, to be fast in a small boat without the pounding that comes from a planing hull.
 
From what I can tell, the Martimas was an over-engined displacement hull. It was quite seaworthy and still capable of high speed in high seas, because it could pass its hull speed without getting up on a plane just through brute force. That's basically what I want, to be fast in a small boat without the pounding that comes from a planing hull.
Going over the hull speed is defined a planing. Deep vee hulls pound much less than rounded hulls at high speed. That is the reason for their design. If you want a boat that fulfills your expectations, start with a Statement of Requirements (SOR). Some things are constraints, which can't be changed. For example, you want it to look like a 1930s boat. As you make the list, some constraints will be in contradiction. That means that you need to eliminate or modify the constraints. An overpowered displacement hull will provide a very rough ride, pound a lot more than a vee hull, and may bow dive or corkscrew. If you want to learn about their behavior, search videos for racing lobster boats.
 
Going over the hull speed is defined a planing. Deep vee hulls pound much less than rounded hulls at high speed. That is the reason for their design. If you want a boat that fulfills your expectations, start with a Statement of Requirements (SOR). Some things are constraints, which can't be changed. For example, you want it to look like a 1930s boat. As you make the list, some constraints will be in contradiction. That means that you need to eliminate or modify the constraints. An overpowered displacement hull will provide a very rough ride, pound a lot more than a vee hull, and may bow dive or corkscrew. If you want to learn about their behavior, search videos for racing lobster boats.
You could be right, but then don't rowing eights get past their hull speed? Are they planing? I though hull speed was a soft limit that passing it was usually bad for efficiency and stability, but not a death sentence or guaranteed planing.
 
That's basically what I want, to be fast in a small boat without the pounding that comes from a planing hull.
Hi SovereignFinn, are you familiar with what Rafnar does with their 'OK hull' ? Not only do they work in the paradigm you mentionned, they also put in years of optimisation with modern tools and real prototyping, and they cater to nordic climates.

(Be warned that a hull that kinda sucks itself down into stable water hardly seems a receipe for fuel efficiency or huge top speeds though. )

(Nevermind the above-waterline looks. You could just as well combine that hydrodynamic paradigm with 20's/30's looks)
 
Last edited:
You could be right, but then don't rowing eights get past their hull speed? Are they planing?
That is a different working principle: very narrow hulls don't face such an massive drag hump slightly above 'hull speed'. Have a look at Nigel Iren's LDL boats, old warships, and also (slim hulled) multihulls.
 
Last edited:
That is a different working principle: very thin hulls don't face such an massive drag hump slightly above 'hull speed'. Have a look at Nigel Iren's LDL boats, old warships, and also (slim hulled) multihulls.
If the main problem is drag, and the Martimas had about 800 horsepower behind her, would she pass her hull speed at all? Thanks a ton for your help, Nigel Irens looks very interesting.
 
That's basically what I want, to be fast in a small boat without the pounding that comes from a planing hull.
I think you need to put some numbers on your wishes. That's becasue "small boat" and "fast" don't mean anything without context. The original you like seems to have been a boat in the 70-80ft lenght range, and was probably doing 15-20kn maximum speed. Now you can consider this a small and fast boat, but today most recreational boaters will have different ideas about that.
This are the boats she was buildt to run from, the 75ft PB 75-foot patrol boat - Wikipedia https://en.wikipedia.org/wiki/75-foot_patrol_boat

When you approach a NA you have to have a rough idea about the numbers so he can understand what you want. Finding one shouldn't be difficult since building such a boat isn't exactly a budget proposition.
 
The original you like seems to have been a boat in the 70-80ft lenght range, and was probably doing 15-20kn maximum speed.
It was actually only 45 feet long, that is a 12-foot boat behind the cabin. It was powered by liberty engines, probably two, for a total of 800 horsepower. I believe it could make 18 knots on flat water, but I'm not sure as I cannot find the source of that information. I know it could at least keep its distance from 75-foot patrol boats; I am unsure beyond that. It does seem I was unfortunate in picking a boat with very little remaining information.
 
Well, you picked her because you like how she looks. I've done the same, quite a few times.... now I'm a Dad. So, y'know.

Anyhoo, you dug the vibe, so to speak. Recreating a historical vessel is a terrible idea. Recreating a historical vibe is a great idea.
 
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.

  • Back
    Top