Help me check this prop design program

Discussion in 'Props' started by Corsair_vtt46, Oct 15, 2009.

  1. Corsair_vtt46
    Joined: Oct 2009
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Vima

    Corsair_vtt46 Junior Member

    I programed with visual basic this funtion to design Kaplan Propeller in nozzle 19 and 37 A for tugboat, in my programe, all informations of main engine are given ( Total Power, Rated RPM, Number of Propellers). Can you tell me some advises about this soft.
    All Green textboxs are places that you input parameters.
    Thanks so much !!!
     

    Attached Files:

  2. Corsair_vtt46
    Joined: Oct 2009
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Vima

    Corsair_vtt46 Junior Member

    Does anybody use it,please give me comment,may be it runs slowly, 5-6 minutes
     
  3. baeckmo
    Joined: Jun 2009
    Posts: 1,654
    Likes: 670, Points: 113, Legacy Rep: 1165
    Location: Sweden

    baeckmo Hydrodynamics

    Patience, Corsair, we have to check it against known benchmarks which takes some time.
     

  4. Corsair_vtt46
    Joined: Oct 2009
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Vima

    Corsair_vtt46 Junior Member

    thanks you baeckmo !!!
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.