Help Merc 135 Tach Wire Location ?

Discussion in 'Outboards' started by Fiber Artz, Jul 19, 2010.

  1. Fiber Artz
    Joined: Jun 2010
    Posts: 12
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Greenwich, CT

    Fiber Artz Junior Member

    Hey I'm just finishing up my custom sea sled, and I need to know where the brown wire draws off the motor to serve as the signal to the tach, ALL and ANY assistance would help, Thank you so very much. If you have pictures that would also help as well The motor is a 93 I believe and is a V-6 135 Mercury.
     
  2. Fiber Artz
    Joined: Jun 2010
    Posts: 12
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Greenwich, CT

    Fiber Artz Junior Member

    I just need to know where to put the brown tach wire on the motor... Please help.
     
  3. powerabout
    Joined: Nov 2007
    Posts: 2,944
    Likes: 67, Points: 48, Legacy Rep: 719
    Location: Melbourne/Singapore/Italy

    powerabout Senior Member

    Fiber
    Should be a grey wire and it is in the loom from the engine.
    depending on what control you have (external sidemount has the plug in it) or the dash loom will have the wire in it.
    ( the wire was tan back in the 70's on Merc's when the tacho was driven by the ignition system rather the charging system.)
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.