hatches,vents and what is a bulkhead and where is it located?

Discussion in 'Boat Design' started by djwkd, Aug 16, 2006.

  1. djwkd
    Joined: Jul 2006
    Posts: 380
    Likes: 2, Points: 18, Legacy Rep: 51
    Location: Newcastle-Upon-Tyne

    djwkd Senior Member

    are hatches needed in a boat and also can i ask what are bulkheads and where are they located?:confused::confused::confused:?????????
     
  2. bntii
    Joined: Jun 2006
    Posts: 731
    Likes: 97, Points: 28, Legacy Rep: 1324
    Location: MD

    bntii Senior Member

    This question could be answered a bit better if you could provide what kind of vessel is under consideration.

    I can provide some generalizations:

    A boat is generally not a sealed tube so hatches are added to get humans, cargo and air in and out of the hull. Bulkheads are athwartship panels which can provide needed structural support for the hull as well as sometimes serving as simple dividers (like walls). Where bulkheads are located is a question of the design though in sailboats a swell place to have a few is near the chainplates/spars.

    Also- ventilation is needed! One of my references states that 10 to 15 CFM should be provided for each person.
     
  3. djwkd
    Joined: Jul 2006
    Posts: 380
    Likes: 2, Points: 18, Legacy Rep: 51
    Location: Newcastle-Upon-Tyne

    djwkd Senior Member

    its a 17' shanty boat
     
  4. Figgy
    Joined: Feb 2006
    Posts: 315
    Likes: 12, Points: 18, Legacy Rep: 88
    Location: TN

    Figgy Senior Member

    I just googled Shanty boat. Is this going to be your design, or from plans? What kind of materials is it going to be made from? Lay it all out for us, give us all the details you have, and lets see what we can come up with!
     
  5. djwkd
    Joined: Jul 2006
    Posts: 380
    Likes: 2, Points: 18, Legacy Rep: 51
    Location: Newcastle-Upon-Tyne

    djwkd Senior Member

    its my own design,i could only find the plan for 'coolwater' that was relatively on the right lines,but there were no real instructions for it.its a 17' made from wood, planks n ply construction (LOL)with a hull lined with empty milk,juice pop bottles and i think a few oil cans (whew) cos' i know where i can find some,no acetone,nothing thats to on the none-eco side.
     
  6. Figgy
    Joined: Feb 2006
    Posts: 315
    Likes: 12, Points: 18, Legacy Rep: 88
    Location: TN

    Figgy Senior Member

    Are you going to live on it, and why the containers? Why not plywood hulls?
     
  7. djwkd
    Joined: Jul 2006
    Posts: 380
    Likes: 2, Points: 18, Legacy Rep: 51
    Location: Newcastle-Upon-Tyne

    djwkd Senior Member

    there will be a hull,but for extra floating,so that if waves come overboard theres less chance of capsizing.yes,i do plan to stay on it but not live on it.
     
  8. djwkd
    Joined: Jul 2006
    Posts: 380
    Likes: 2, Points: 18, Legacy Rep: 51
    Location: Newcastle-Upon-Tyne

    djwkd Senior Member

    oh,and the detachable cabin thread is called detachable cabin.
     
  9. Figgy
    Joined: Feb 2006
    Posts: 315
    Likes: 12, Points: 18, Legacy Rep: 88
    Location: TN

    Figgy Senior Member

  10. djwkd
    Joined: Jul 2006
    Posts: 380
    Likes: 2, Points: 18, Legacy Rep: 51
    Location: Newcastle-Upon-Tyne

    djwkd Senior Member

    naa,i dont want engines fitted.
     
  11. djwkd
    Joined: Jul 2006
    Posts: 380
    Likes: 2, Points: 18, Legacy Rep: 51
    Location: Newcastle-Upon-Tyne

    djwkd Senior Member

    also,i think it may be to small
     
  12. djwkd
    Joined: Jul 2006
    Posts: 380
    Likes: 2, Points: 18, Legacy Rep: 51
    Location: Newcastle-Upon-Tyne

    djwkd Senior Member

    i need to be able to fit 5-7 people MAX SLEEPING.i figured i could get 1 or 2 in the hull without getting the boat over weight (LOL) and five upstairs,and more room avilable for doing other things (like chess or watching the ducks speedly overtake us) well,that is for the remaining lot who arent paddling or steering,but generally it has 3 cabins,1 outside suitable for moderate-high winds,1 inside for moderate to high winds and one under a tent thing for low winds (using the large sail) (so i guess youve figured out the 'power'-sail and oar.and can i ask,whats the difference between a paddle and an oar?
     
  13. djwkd
    Joined: Jul 2006
    Posts: 380
    Likes: 2, Points: 18, Legacy Rep: 51
    Location: Newcastle-Upon-Tyne

    djwkd Senior Member

    to be simple,i have to have a shanty.
     
  14. djwkd
    Joined: Jul 2006
    Posts: 380
    Likes: 2, Points: 18, Legacy Rep: 51
    Location: Newcastle-Upon-Tyne

    djwkd Senior Member

    i have already started building it
     

  15. Figgy
    Joined: Feb 2006
    Posts: 315
    Likes: 12, Points: 18, Legacy Rep: 88
    Location: TN

    Figgy Senior Member

    Thats a tall order for a man without plans:)
    Already started huh? How far along are you? You REALLY might want to reconsider this!!
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.