Submarine design

Discussion in 'Boat Design' started by lovel Jelacic, Dec 6, 2004.

  1. lovel Jelacic
    Joined: Dec 2004
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Zagreb, Croatia

    lovel Jelacic New Member

    Hi,
    I'm a student of Naval Architecture from Croatia, and I'm specially interested in submarine design. If anyone had come upon a good book on that topic, please, let me know.
    Thanks.
     
  2. yipster
    Joined: Oct 2002
    Posts: 3,486
    Likes: 98, Points: 58, Legacy Rep: 1148
    Location: netherlands

    yipster designer

    in the "personal submersibles" forums some books -i did not read- keep coming up as very good, dont recall tittles here and now but here is their booklist.

    p.s. thanks for the reply on "GZ GM Cb Cp and other" thread. reading back i see its still a lot to learn and i'm checking the volumes you mentiont.
     
  3. lovel Jelacic
    Joined: Dec 2004
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Zagreb, Croatia

    lovel Jelacic New Member

    thanks, yipster. i'll check the books...
     
  4. exomos
    Joined: Aug 2005
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Dubai

    exomos New Member

    submarine engineer position

    Do you know any mechanical engineer who would be interested for a production manager position in a submarine shipyard
     
  5. Jim Kuiack
    Joined: Aug 2005
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Fort Lauderdale

    Jim Kuiack New Member

    Submarine Engineering

    I just noticed your note on the BoatDesign.net forum.

    I am a Marine Engineer and yacht design consultant and I have worked with several submarine projects.

    The vessels were 2, 3, 6 and 10 person submarines to be built by Seamagine Corporation in the USA or GSE in Italy.

    I would be very interested in the Submarine Production Manager's position that you mentioned.

    Please forward your contact details so that I may forward you my CV and references.

    Regards;

    James Kuiack
    Chief Engineer
    PH; ++ 954 471 1582
    JimKuiack@aol.com
     

  • Loading...
    Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
    When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.