The Boat Design & Boatbuilding Site
GRP pitliner help ?
- Thread starter PitMan
- Start date
ondarvr
Senior Member
- Joined
- Dec 27, 2005
- Posts
- 3,251
- Reaction score
- 856
- Location
- Spokane. USA
This project is being vastly over complicated.
Make the pit whatever shape you want out of anything you feel will support the shape desired. If it’s concrete, and not fully dry, use your plastic sheeting to cover it.
Buy the cheapest polyester resin you can find, and some low cost glass, it won’t matter what glass you use.
Apply Two layers of glass and then roll on two layers of gel coat, the last coat with wax added.
If you want a smoother finish you can do that with a little more fairing of the surface, it’s not needed though
Make the pit whatever shape you want out of anything you feel will support the shape desired. If it’s concrete, and not fully dry, use your plastic sheeting to cover it.
Buy the cheapest polyester resin you can find, and some low cost glass, it won’t matter what glass you use.
Apply Two layers of glass and then roll on two layers of gel coat, the last coat with wax added.
If you want a smoother finish you can do that with a little more fairing of the surface, it’s not needed though
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.
Advertisement: