Gori 2 Blade Folding Rebuild

Discussion in 'Props' started by doogymon, Sep 15, 2015.

  1. doogymon
    Joined: Jul 2006
    Posts: 23
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Ontario

    doogymon Junior Member

    Hi

    Not sure if I have the terminology correct.

    Have a 12 x 9 Gori 2 blade with 1" shaft. The teeth in the middle of the petals are good but the ear lobes that get pinned to the hub are a bit worn.

    Can the "Flats" on the ear lobes of the petals be built up by a competent welder with the correct material? The build up would of course be milled down to spec?

    I am far away from the Guru shop in the US East Coast and the chap there appeared to just want to sell me a new one!

    Cheers & thanks

    Doog
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.