Captain Joeb
New Member
- Joined
- Dec 15, 2018
- Posts
- 1
- Reaction score
- 0
- Location
- North Carolina
If anyone can give me some feed back on,
Crusader gen IV block vs Gen V block. externals
I'm most concerned with all the external bolt ons and their compatibility's from Gen V and going back onto the Gen IV rebuilt motor I have.
IE. heat exchangers alternators starters transmissions cooling hoses intake carbs etc
I have a completely blown up Crusader Gen V. 1993 closed loop fresh, the long block and heads are junk
I also have 2 rebuilt Crusader 454 Gen IV's. 1989's raw water
I going to put the Gen IV long block and heads that have been rebuilt into boat and try to bolt on as much of the Gen V bolt on parts onto the rebuilt Gen IV
Is this possible ?
Thanks anyone Capt Job
Crusader gen IV block vs Gen V block. externals
I'm most concerned with all the external bolt ons and their compatibility's from Gen V and going back onto the Gen IV rebuilt motor I have.
IE. heat exchangers alternators starters transmissions cooling hoses intake carbs etc
I have a completely blown up Crusader Gen V. 1993 closed loop fresh, the long block and heads are junk
I also have 2 rebuilt Crusader 454 Gen IV's. 1989's raw water
I going to put the Gen IV long block and heads that have been rebuilt into boat and try to bolt on as much of the Gen V bolt on parts onto the rebuilt Gen IV
Is this possible ?
Thanks anyone Capt Job