G3 jet engine mounting

Discussion in 'Jet Drives' started by franc, Apr 24, 2012.

  1. franc
    Joined: Apr 2012
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: ma

    franc New Member

    Just purchased a new G3 1656ccj with 60/40 yamaha. The manual says that the leading edge of the jet intake should be even with the bottom of the boat. However, the intake is mounted about 4 inches below the bottom of the boat. Anyone have any knowledge in this issue?
     
  2. baeckmo
    Joined: Jun 2009
    Posts: 1,118
    Likes: 117, Points: 63, Legacy Rep: 1165
    Location: Sweden

    baeckmo Hydrodynamics

    The installation you have creates a lot of extra drag and should be corrected in accordance with the manual!
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.