crooner1

Discussion in 'Wooden Boat Building and Restoration' started by crooner1, Jul 10, 2006.

  1. crooner1
    Joined: Jul 2006
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: OHIO

    crooner1 New Member

    Hello all. I am completely new to boat building and am now building my first 12' skiff. My question is: Do I need to add some type of floatation material in this boat? Also, the number of different epoxy's is confusing. Any suggestions? Yes, price is a factor. I thank you in advance for any help.
     
    crooner1, Jul 10, 2006
    #1
  2. marshmat
    Joined: Apr 2005
    Posts: 4,127
    Likes: 149, Points: 63, Legacy Rep: 2043
    Location: Ontario

    marshmat Senior Member

    Small boats are supposed to have level flotation- that is, when the boat is fully flooded and not loaded, it floats at the surface without capsizing. This is usually accomplished by putting flotation foam in the forepeak and under the aft seats. It would be a Very Bad Idea to skimp on the flotation.
     
    marshmat, Jul 10, 2006
    #2
  3. crooner1
    Joined: Jul 2006
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: OHIO

    crooner1 New Member

    Marshmat. Thank you very much. You've been very helpful.
     
    crooner1, Jul 10, 2006
    #3
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.