Fiberglassing questions

Discussion in 'Boat Design' started by baylinercapri, Mar 17, 2008.

  1. baylinercapri
    Joined: Mar 2008
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Hawaii

    baylinercapri New Member

    1991 Bayliner Capri/Cuddy...outboard.
    It's been gutted completely....should I fiberglass the floors to the hull? Or leave a gap?
    I had to remove the gas tank for cleaning.....cut out the cover....when I reinstall the cover...could I just use screws to hold it in place so I can remove the tank in the future if need be or fiberglass it in?
    I have no drain holes for the side partitions....the limber holes down the center are open and water drains freely...but collects in the side compartments....I was going to drill a few small holes to let the water drain into the center and out the rear...possible? No problems? Thanks!
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.