Fences on wing

Discussion in 'Boat Design' started by sub_0, Jun 24, 2016.

  1. sub_0
    Joined: May 2015
    Posts: 15
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Croatia

    sub_0 Junior Member

    Hi guys ,

    Can you tell me wich is the best and easyest way to put fences on pair of hydrofoil wings .... Wings are made from carbon / epoxy , two part from female mold . One wing is in span 800 mm for small RC model .

    Also any experience with carbon / aluminium gluing with six-10 adhesive from WS ?

    Thx in advance
     
  2. rwatson
    Joined: Aug 2007
    Posts: 5,929
    Likes: 323, Points: 83, Legacy Rep: 1749
    Location: Tasmania,Australia

    rwatson Senior Member

    I would make some FG sheet on a flat surface with say three layers of 6oz cloth. Cut them to shape and epoxy them on. Sand the foils first where they are being glued onto the foil.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.