Boat storage?

Discussion in 'Wooden Boat Building and Restoration' started by BHOFM, Oct 17, 2009.

  1. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    [​IMG]

    My wife as a kitty for every occasion and if I don't use one
    now and then, well you married guys know what I mean
    :rolleyes:

    OK, the boat is under the roof out of the weather. All the
    stuff is out, tires are off the ground. It has a custom fitted
    cover, not water proof, water resistant. I plan on covering
    one side with a tarp. All the lines, tie downs, rigging is
    off and inside. Battery is hooked in with the back up for
    the house, solar set up. There are no leaves or dirt in
    the boat.

    What have I forgotten?

    I took the pictures before I took the standing rigging off.

    [​IMG]

    [​IMG]
     
  2. marshmat
    Joined: Apr 2005
    Posts: 4,127
    Likes: 149, Points: 63, Legacy Rep: 2043
    Location: Ontario

    marshmat Senior Member

    Can't quite read the licence plate- where in the US are you? If you're in an area that gets a lot of snow, I might add a way to keep the snowbanks from building up against the trailer. I don't see an engine; about 3/4 of my winterizing time is spent fiddling with the outboard, taking care of the hull is easy. No cover will keep ALL the water out, so if there's a drain plug, open it; if not, you might have to check under the cover now and then to make sure no ice is building up in bad places.

    She looks nice.... if a bit sad to be away from her natural, watery home....
     
  3. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    Arkansas, we get some snow. The motor is electric and is
    in the house. No plug, the name of the boat is:

    Unnecessary Complications
    :rolleyes:

    I plan on covering the back and starboard side to keep out
    blowing rain and snow.

    Plan on doing the wheel bearing ASAP!

    Thanks for the reply.

    B
     
  4. missinginaction
    Joined: Aug 2007
    Posts: 1,103
    Likes: 254, Points: 83, Legacy Rep: 512
    Location: New York

    missinginaction Senior Member

    I really think you have it covered (pardon the pun). Over the years I've seen people spend all sorts of money on storage systems. I've found a simple a-frame over the boat with open ends for good air circulation works best for me. I've a friend who's stored in one of those portable quanset huts. He closes it up tight and it sweats inside. He's had quite a few issues with mildew and rot over the years. I keep telling him that air circulation is key, but some people just refuse to listen.

    Love the kitty,

    MIA
     
  5. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    Pick up a few of those silver tarps (they're the heaviest) and tack them as curtains on the posts to keep out the weather. Clear plastic sheeting will offer some advantages, durability isn't one of them, but you can see through it and light passes though. Both the tarps or plastic sheeting can be rolled up and pinned out of the way so you can work on it if desired.

    Considering the weight of the boat/trailer combo, you don't need the amount of prep on the trailer that you've employed. It could easily just sit on it's wheels. You'll loose a pound or two of air pressure each month, which isn't a big deal over a normal winter, just re-inflate in the spring.

    Spray some WD-40 on bare metals, like bolts, springs, etc., wash it off in the spring.

    Open all hatches, covers, deck access plates, etc. so air can circulate around everything and you're good to go.

    If you don't want your transom or other varnished areas to darken, then keep UV (sunlight) off them.
     
  6. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    I usually keep my small boats upside down. It keeps mildew from building up.
     
  7. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    That looks a little big to easily flip. I'm guessing about 17' and 400+ pounds. A few well fed friends could handle her with a little beer and bratwurst waiting as a reward (hey, it works for me).
     
  8. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    Par, you may need to get your glasses checked.:p :p :p

    Twelve feet and under 200lbs, but still a handful to flig
    without several people.

    I put it on the blocks so I could do the wheel bearings.

    The cover covers the transom.

    Thanks for all the input.

    Momma's not real happy about the boat on the deck, hanging
    tarps is probably out of the question.

    I have known several people that ruined their boats and
    cars by covering them too well.

    It will get flipped and a coat of paint next spring before
    going to the lake again.

    We got our first frost last night, so I timed it just right..:D
     
  9. Herman
    Joined: Oct 2004
    Posts: 1,618
    Likes: 94, Points: 48, Legacy Rep: 1240
    Location: The Netherlands

    Herman Senior Member

    You forgot?

    ... to take the ramps away. They will make you trip every now and then...

    Try make a nice tarpaulin, and build some structure to leave the ends open (just a bit). No water enters the boat, and ventilation will be plenty. She will survive the winter.
     
  10. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    One side had no water in the wheel bearing, the other just
    a bit. Get them cleaned up and back on at my leisure.

    I think I am done. If there is a threat of bad weather I
    can throw a tarp over it. The cover is breathable so it
    can air out if it gets just a bit damp.

    The cover is made from a $19.95 Wal Mart car cover, medium
    size. I removed the center panel and sewed it back together.
    Then I shorten it about six feet. Works great for dust,
    sun and bird deposits.

    [​IMG]
     
  11. apex1

    apex1 Guest

    If it breethes its ok. And it keeps the leaves out too (very dangerous stuff).
    I would just have flipped her over though.
     

  12. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    Hell 12' and 200 pounds, you could just flip it up on your hip and roll it yourself. Your cover looks fine. Remove it every so often and let her breath, check for leaks, bugs, mice making a home for themselves, etc. Some moth balls scattered about will keep most varmints from attempting to use it as a brothel.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.