panga keel lines

Discussion in 'Boat Design' started by im412, Jun 8, 2006.

  1. im412
    Joined: Jan 2005
    Posts: 61
    Likes: 1, Points: 0, Legacy Rep: 5
    Location: australia

    im412 Junior Member

    this is the 35yr old yamaha designed panga keel lines
    this builder squared off the transom
    the original had an up swept transom..like panga.com pangamarine etc

    i am wondering what would be the right design name features of this hull
    jack

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. im412
    Joined: Jan 2005
    Posts: 61
    Likes: 1, Points: 0, Legacy Rep: 5
    Location: australia

    im412 Junior Member

    bump
    any names for this keel line?
    it is a flatish triangular section/pad starting from the water line of the bow and runs back to the transom
    from the flatish center pad which is edged with straits/skegs it is chined
    cheers jack
     
  3. im412
    Joined: Jan 2005
    Posts: 61
    Likes: 1, Points: 0, Legacy Rep: 5
    Location: australia

    im412 Junior Member

    my best guess so far is either
    a modified v with full length delata pad along the center

    or a 3 chine multy chine hull

    the chines are constant and the angle doesnt vary along its length

    anyone has any input?
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.