electric boat

Discussion in 'Boat Design' started by n.r.g97, Oct 4, 2009.

  1. n.r.g97
    Joined: Oct 2009
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: bridgwater

    n.r.g97 New Member

    hi people i'm new to the forum just wondering if anyone could give me any more info on doing an electric boat it would be a 1965 ex fishing boat and is 30'' long and 8'' wide and would be fitted with a forklift motor please could someone tell me how difficult this would be and some help as to how to do it thanksNOAH
     
  2. messabout
    Joined: Jan 2006
    Posts: 3,368
    Likes: 511, Points: 113, Legacy Rep: 1279
    Location: Lakeland Fl USA

    messabout Senior Member

    We need to know a lot more about the boat. If it is to be a planing boat the electric is probably not what you need. I presume that the dimensions of the boat are in feet not inches as written. The short answer to your question; can it be done, is yes. Should it be done?... is quite another matter.
     
  3. gonzo
    Joined: Aug 2002
    Posts: 16,810
    Likes: 1,723, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    What's your experience in mechanical and electrical systems? If you need a step by step primer, it would take a few books at least. We can suggest a few of them. Once you are done reading, you can narrow your question.
     
  4. n.r.g97
    Joined: Oct 2009
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: bridgwater

    n.r.g97 New Member

    its basicaly for going up and down canals and yes it is in feet and we have the motor in a suzuki sj (4x4) which runs down via the front prop to the forklift gear box which is as far as i can see the same as a boat gear box then from the gearbox to the rear diff to the wheels now i was thinking if you were to run the gear box prop onto a propeller it might well work thanksNOAH
     
    Last edited: Oct 5, 2009
  5. gonzo
    Joined: Aug 2002
    Posts: 16,810
    Likes: 1,723, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Some punctuation would make your post easier to read.
     
  6. D.I.M.1
    Joined: Oct 2009
    Posts: 54
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Maryland

    D.I.M.1 Junior Member

    I'm currently undertaking a project that will make a boat used for commercial fishing completely electric, sort of so I'm interested in what you're doing. No I'm not a company I'm a student stuck doing a research project, but I appreciate any help you guys can give me.
     
  7. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

     
  8. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    The reason I ask is that a fishing boat is a WORK boat and will you be able to store enough power to do all the work and still make it safely back to port?
     
  9. pistnbroke
    Joined: Jan 2009
    Posts: 1,405
    Likes: 34, Points: 48, Legacy Rep: 404
    Location: Noosa.Australia where god kissed the earth.

    pistnbroke I try

    I guess this is bridgewater in the UK and he is talking about 4 mph on the uk canals .....there is a UK electric boat society so if its 4mph I dont think you have too much of a problem if you are a very good practical person who knows his nuts and bolts and welder .....
     
  10. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    He can increase his range by catching and harnessing the power of electric eels. He is talking about a fishing boat. Any electric eels in English canals? Any commercial fishing in the English canals? Can English fish swim faster than 4 mph? If so, they'll be hard to catch.
     

  11. apex1

    apex1 Guest

    Lets sum it up:

    we have a Suzuki 4 wheel drive boat, of 30´by 8´built in 1965, with a forklift motor and a front prop, with the rear diff to the wheels!
    The builder is NOAH.....................
    I guess there will come assistance from above! Far above...............very far....
    No need for our contribution.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.