carbon mast, keflar rigging?

Discussion in 'Multihulls' started by yipster, Sep 17, 2006.

  1. yipster
    Joined: Oct 2002
    Posts: 3,486
    Likes: 97, Points: 58, Legacy Rep: 1148
    Location: netherlands

    yipster designer

    i hear about keflar rigging and wonder, quik search above for keflar came up blank
     
  2. Figgy
    Joined: Feb 2006
    Posts: 315
    Likes: 12, Points: 18, Legacy Rep: 88
    Location: TN

    Figgy Senior Member

  3. yipster
    Joined: Oct 2002
    Posts: 3,486
    Likes: 97, Points: 58, Legacy Rep: 1148
    Location: netherlands

    yipster designer

    dumb mistake, thanks for setting me right. "kevlar" shows planty returns.
    long time not having sailed i hear about kevlar rigging and will search for how that works
     
  4. RHough
    Joined: Nov 2005
    Posts: 1,792
    Likes: 61, Points: 0, Legacy Rep: 793
    Location: BC Summers / Nayarit Winters

    RHough Retro Dude

    Kevlar is old technology. Do a search on PBO for what the deep pocket guys are using these days.

    PBO rigging is about 30% more expensive than SS rod rigging and has a short lifespan (3-5 years). The cost of PBO is then almost 3 times the cost of SS rod, since rod lasts 10 years with no problem.
     
  5. yipster
    Joined: Oct 2002
    Posts: 3,486
    Likes: 97, Points: 58, Legacy Rep: 1148
    Location: netherlands

    yipster designer

    thanks for the pointer, maybe i should be re-rigged, a simple flew and every muscle in the body hurts
    no phenylene benzobis oxazole in my old polytechnics books but interesting and maybe even better than you say
    do you also happen to know what a folding rod as used in furling jibs might be called?

    http://www.powerliterigging.com/downloads/Powerlite Racer Benefits V4L.pdf#search="PBO + rig"
    http://www.oceanyachtsystems.co.uk/Ocean Issue 02.pdf#search="PBO + rig"
    http://www.futurefibres.co.uk/da/39114
    http://www.boatdesign.net/articles/standing-rigging/index.htm
     
  6. catmando2
    Joined: Sep 2006
    Posts: 167
    Likes: 4, Points: 0, Legacy Rep: 38
    Location: Australia

    catmando2 Malaysia bound....soon

    most of the go fast multi's have rotating mast's, so rod rigging no good,I and a lot of guys use wire [1 x19] but they fatigue pretty quick. Had my strands start to break on forestay after 3 years . reckon the rope would be the go, light,less windage supposedly,but hates the sun.
     
  7. yipster
    Joined: Oct 2002
    Posts: 3,486
    Likes: 97, Points: 58, Legacy Rep: 1148
    Location: netherlands

    yipster designer

    free standing mast and ropes i see, but only 3 years on PBO?
    did read kevlar was more sensitive and PBO needed a check after 5 years...
    now how do you you furl on a rope? i was howlered those furl rods nowadays fold down zigzag?
     
  8. RHough
    Joined: Nov 2005
    Posts: 1,792
    Likes: 61, Points: 0, Legacy Rep: 793
    Location: BC Summers / Nayarit Winters

    RHough Retro Dude

    The boats that use PBO rigging probably do not use roller furling on the headsails. For equal strength the PBO has greater diameter and would not fit inside a normal furler. PBO would work for a sail that furls around it's own stay.
     
  9. rob broekman
    Joined: Sep 2006
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: finland

    rob broekman proffesional sailor

    for carbon masts go for the best. www.marstrom.com
    we just installed a 16m one and its a piece of art
     
  10. Maciek188
    Joined: Jul 2005
    Posts: 10
    Likes: 1, Points: 0, Legacy Rep: 22
    Location: Brooklyn, NY

    Maciek188 Junior Member

    How much it costs?
     

  11. catmando2
    Joined: Sep 2006
    Posts: 167
    Likes: 4, Points: 0, Legacy Rep: 38
    Location: Australia

    catmando2 Malaysia bound....soon

    How long's a peice of string?:D

    Dave
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.