design projekt

Discussion in 'Boat Design' started by falk, Nov 18, 2003.

  1. falk
    Joined: Nov 2003
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: germany

    falk Junior Member

    Hello!

    My name is Falk. I’m a design-student from Germany and I’m working on an interior for a versatile utility boat. The main point is to offer more flexibility to the seat and space arrangement to provide a wider range of possibilities.
    The interior should offer the possibility to use the boat for commuting, hauling, fishing and recreation.
    If you feel you could say something about that topic, please do so.
    What kind of boat do you use (size, material, power) and what for?
    What problems do you find?
    Is the material of the interior wearing off much, where most and why?
    Do you have wishes, what should be improved?
    Or other Ideas in general?

    I’m looking forward to any feedback.
    Thanks a lot and have a good day, Falk
     
  2. gonzo
    Joined: Aug 2002
    Posts: 15,201
    Likes: 928, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    For fishing I like boats that can be hosed down. Carpet and upholstery are difficult to clean and stink after a while.
     
  3. Corpus Skipper
    Joined: Oct 2003
    Posts: 606
    Likes: 8, Points: 0, Legacy Rep: 173
    Location: Corpus Christi TX

    Corpus Skipper Hopeless Boataholic

    I agree with Gonzo. Gelcoat or painted fiberglass with removable marine vinyl seating surfaces. Don't forget ample deck drainage and channels around flush hatches. We here in Texas are fond of the "splatter" finish. Doesn't show the inevitable stains as easily as solid colors. Hope this helps!
     
  4. falk
    Joined: Nov 2003
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: germany

    falk Junior Member

    well yes!
    thanks for the information, never really been fishing on boat, so that gave me a good idea of what to think about. Give me more of it if you have the time!
     
  5. yipster
    Joined: Oct 2002
    Posts: 3,486
    Likes: 96, Points: 58, Legacy Rep: 1148
    Location: netherlands

    yipster designer

    good design projekt

    i can think of dozens of improvements. everyday i see handy systems, on other boats too, not to mention the many ideas that come up spontaniously. it often does depend on the type of boat but look at new boats, folding seat systems, unitbuilding, fabrics, materials etc. yes, make those boats more comfortable!

    yipster
     
  6. falk
    Joined: Nov 2003
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: germany

    falk Junior Member

    Hi and thanks for your reply!

    First off my attention lies on a seating system, that gives you the possibility to change from seating configuration to cargo situation easily, for I'm working on a small open boat with a very limited amount of space available.

    what do you think of the practicabillity of some folding systems mounted to the interior of boats. Is it so that one would really feel the need to change the seat-arrangement? what problems do you see with moving parts and folding mechanics due to weather and dirt?

    falk
     
  7. gonzo
    Joined: Aug 2002
    Posts: 15,201
    Likes: 928, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Seats like that are standard equipment in many small boats.
     
  8. yipster
    Joined: Oct 2002
    Posts: 3,486
    Likes: 96, Points: 58, Legacy Rep: 1148
    Location: netherlands

    yipster designer

    still many small boats dont have a flipover backrest that enables fishing sitting backwards :D
    newer boats often show better ergonomics. think of rod storage tubes etc.
     
  9. falk
    Joined: Nov 2003
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: germany

    falk Junior Member

    What do you think about underfloor storage room, is that really handy to use?
     
  10. gonzo
    Joined: Aug 2002
    Posts: 15,201
    Likes: 928, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    By underfloor do you mean under a cockpit sole like a ski locker?
     
  11. falk
    Joined: Nov 2003
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: germany

    falk Junior Member

    Yes, that´s what I mean. Is anyone using such a thing? What about water on the floor?
     
  12. gonzo
    Joined: Aug 2002
    Posts: 15,201
    Likes: 928, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Yes, every ski boat has it. In older boats, especially sailboats with deep bilges, it was a typical cool storage area. What do you mean by water on the floor? Floors are the structural members that join the frame ends and reinforce the keel. Do you mean cockpit sole?
     

  13. falk
    Joined: Nov 2003
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: germany

    falk Junior Member

    Yes I guess I mean the cockpit sole then, I had no dictionary with me and thought floor would be what I searched for. Sorry for the confusion.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.