Delftship Extrude Problem

Discussion in 'Software' started by Dr34m3r, Feb 23, 2015.

  1. Dr34m3r
    Joined: Mar 2012
    Posts: 161
    Likes: 4, Points: 18, Legacy Rep: 10
    Location: Europe

    Dr34m3r Senior Member

    Hello,

    I have extrude an imported marker curve (DXF - pink color) in Delftship and then Extrude vertically by 5 meter. but why the extruded surface deviating from the curve ? It is happening only in curve location , not on straight line.

    Picture of Top view attached.

    thanks
     

    Attached Files:

  2. TANSL
    Joined: Sep 2011
    Posts: 7,351
    Likes: 690, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Probably because the surface is generated using the curve points as control points, not as fit points.
     
  3. Dr34m3r
    Joined: Mar 2012
    Posts: 161
    Likes: 4, Points: 18, Legacy Rep: 10
    Location: Europe

    Dr34m3r Senior Member

    How to check or do it correctly ?
     

  4. TANSL
    Joined: Sep 2011
    Posts: 7,351
    Likes: 690, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Sorry, I donĀ“t know Delftship. You probably have to define the base curve with many more points and then act on the control points of the surface trying to bring it closer to the curve.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.