Cost of building runabout?

Discussion in 'Wooden Boat Building and Restoration' started by old750, Sep 14, 2007.

  1. old750
    Joined: Sep 2007
    Posts: 13
    Likes: 1, Points: 0, Legacy Rep: 16
    Location: Cobourg, Ontario, Canada

    old750 Junior Member

    So I've got the bug to build a runabout someday. Can someone take a guess at the cost of materials (minus engine) for building some of these Glen L designs? Here are the ones I really like:

    http://www.boatdesigns.com/products.asp?dept=212

    http://www.boatdesigns.com/products.asp?dept=238

    http://www.boatdesigns.com/products.asp?dept=261 (my favorite)

    http://www.boatdesigns.com/products.asp?dept=784

    http://www.boatdesigns.com/products.asp?dept=242 (I know this one's expensive)

    Utlimately I may end up with this one because outboard seems alot easier:

    http://www.boatdesigns.com/products.asp?dept=324


    So any good guesses are welcome!
     
  2. KnottyBuoyz
    Joined: Jul 2006
    Posts: 829
    Likes: 56, Points: 0, Legacy Rep: 685
    Location: Iroquois, Ontario

    KnottyBuoyz Provocateur & Raconteur

    That's a question that gets asked of Dave Grason the moderator of the Glen-L forums. He posted this last week in response to another request. It might provide some insight into what you want to know.

    http://glen-l.com/phpBB2/viewtopic.php?p=26427&highlight=#26427

    Sorry for posting links to other BBSs Admin types. If it's not Kosher just delete.
     
  3. Poida
    Joined: Apr 2006
    Posts: 1,188
    Likes: 51, Points: 48, Legacy Rep: 497
    Location: Australia

    Poida Senior Member

    Why would you need to guess?

    Last time I was in the glen-l site all their designs had the list of material required.

    Ring suppliers and ask them the cost as materials cost change depending where you live.

    Poida
     
  4. old750
    Joined: Sep 2007
    Posts: 13
    Likes: 1, Points: 0, Legacy Rep: 16
    Location: Cobourg, Ontario, Canada

    old750 Junior Member

    I understand what your saying but I don't want to bother anyone for a quote on something I'm not prepared to buy in the near future. This is a project for next year maybe. These things take time. IE. My local lumber yard took 4 days to price a 1/4 sheet of marine ply. I tried to guestimate with my dad and we figured about $8000 CAN for the Thunderbolt project.

    That being said, I know that I sometimes make mistakes on projects which produces scrap :) Also the actual cost VS estimated cost is always higher. That's why I'm asking people who have actually done it. They would know best.

     
  5. KnottyBuoyz
    Joined: Jul 2006
    Posts: 829
    Likes: 56, Points: 0, Legacy Rep: 685
    Location: Iroquois, Ontario

    KnottyBuoyz Provocateur & Raconteur

    I think if you do a little research you'll get yourself to a rough estimate. Say $5K for the boat. Then you have to mentally prepare yourself for two things. The best case scenario and the worst case scenario. Best case maybe $4K and worst case maybe $10K. I know it doesn't sound logical but everyone I've talked to says that building your own boat will cost you twice as much as you expected and take twice as long as you planned.

    On the other hand if you're thrifty and want to invest the time in the research you can find deals on equipment and hardware for your project before you begin. That's what we're doing and just saved about $600 on 4 portlights we got off of e-Bay! Also have 3000 board feet of NA black cherry seasoning in my brothers woodshop that I picked up for a song!

    Dunno if that'll help.

    Rick
     
  6. old750
    Joined: Sep 2007
    Posts: 13
    Likes: 1, Points: 0, Legacy Rep: 16
    Location: Cobourg, Ontario, Canada

    old750 Junior Member

    I always multiply my time estimates by 3 no matter what project, and for some reason in always works. One my my dad's tips. I think it runs in the family :)
     

  7. marshmat
    Joined: Apr 2005
    Posts: 4,127
    Likes: 149, Points: 63, Legacy Rep: 2043
    Location: Ontario

    marshmat Senior Member

    Yup, sounds about right.

    Material prices do tend to be pretty variable (ie, they go UP on a regular basis). But I've found most local suppliers are happy to quote just about anything provided there's a good chance you'll end up ordering from them, eventually, sometime. Some, like fibreglass cloth, don't change much. Others, like carbon fibre or nice woods, swing all over the place (carbon fibre costs shot up like a rocket when Boeing started tendering supply contracts for the Dreamliner).
    A lot of Ontario-based suppliers, even small local ones, now publish their price lists online. This can be a handy way to get the information you want.
     
Loading...
Similar Threads
  1. flanagaj
    Replies:
    5
    Views:
    1,970
  2. Poida
    Replies:
    17
    Views:
    3,837
  3. goodwilltoall
    Replies:
    48
    Views:
    9,730
  4. johnnythefish
    Replies:
    7
    Views:
    1,419
  5. Boracay
    Replies:
    6
    Views:
    1,445
  6. John Perry
    Replies:
    5
    Views:
    1,501
  7. Rod Tait
    Replies:
    0
    Views:
    896
  8. Rick Goodwell
    Replies:
    10
    Views:
    1,889
  9. Joey Bergeron
    Replies:
    50
    Views:
    4,811
  10. Travis Grauel
    Replies:
    7
    Views:
    2,563
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.