Fast drying timber....

Discussion in 'Wooden Boat Building and Restoration' started by Roly, Dec 7, 2007.

  1. Roly
    Joined: Jul 2005
    Posts: 508
    Likes: 23, Points: 18, Legacy Rep: 222
    Location: NZ

    Roly Senior Member

    Does vacuum enhance the deep drying of timber for a fast dry?
    Anybody have any experience of this? I am not worried about checking as it is
    localised, 20mm thick strip planking, and will soon be under epoxy & glass.
    It is from a dehumidifier accident pooling water in the hull.
     
  2. rwatson
    Joined: Aug 2007
    Posts: 6,276
    Likes: 542, Points: 113, Legacy Rep: 1749
    Location: Tasmania,Australia

    rwatson Senior Member

    You may be on to something there Roly - you may even avoid any timber distortion as a vacuum would act quickly like 'freeze dried' vegetables and fruit.
    hey - its been done - google vaccum dried timber
    http://www.nafi.com.au/media/view.php3?id=59
    "... pilot-scale showed that 19mm and 25mm thick hardwood boards can be dried in as little as five days. ..."
    You are a genius behind your time !! :)
     
  3. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 506, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    Steaming green lumber will dry it very quickly. Ask any old salt that has bent some steamed frames.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.