stations onto unrolled surfaces Rhino

Discussion in 'General Computing' started by lazeyjack, Apr 18, 2008.

  1. lazeyjack

    lazeyjack Guest

    How to get stations onto surfaces, Tried putting on same layer as surface, but no joy, any answers please
     
    lazeyjack, Apr 18, 2008
    #1
  2. jsh
    Joined: Sep 2003
    Posts: 25
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: vancouver

    jsh Junior Member

    if I understand your question right I would unroll the surface and select the station when prompted for selection set.
    john
     
    jsh, Apr 18, 2008
    #2
  3. lazeyjack

    lazeyjack Guest

    nope dont understand, in Rhino 2, can you be a bit more explicit, please, me a very green user Rhino
     
    lazeyjack, Apr 18, 2008
    #3
  4. bhnautika
    Joined: Feb 2006
    Posts: 852
    Likes: 57, Points: 38, Legacy Rep: 571
    Location: australia

    bhnautika Senior Member

    Stu you have to select the contour/section lines that are on the surface plus the surface you want to unroll.
     
    bhnautika, Apr 18, 2008
    #4
    1 person likes this.
  5. jsh
    Joined: Sep 2003
    Posts: 25
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: vancouver

    jsh Junior Member

    lazy jack what are you trying to do?
    i can probably walk you through the process if you define your objective
    john
     
    jsh, Apr 19, 2008
    #5

  7. lazeyjack

    lazeyjack Guest

    Unroll a surface then put the stations on it, I have help thanks John, from Rhino 4, dont think possible in 2
     
    lazeyjack, Apr 19, 2008
    #6
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.