steering connection kit ?

Discussion in 'Outboards' started by valvebounce, Jul 2, 2017.

  1. valvebounce
    Joined: Dec 2010
    Posts: 577
    Likes: 15, Points: 18, Legacy Rep: 124
    Location: manchester uk

    valvebounce Senior Member

    1999 25hp johnson.(two cylinder)
    I have the steering in place,(wheel to engine)
    I am struggling to find what the kit is called that bolts onto the engine that the steering cable/rod runs through.
    The engine has a 3 hole bar that is part of the casting.(one large hole in the middle of two smaller holes.)
    I will also need the right angled rod that fixes to the cable/rod end,and returns back to the engine.
    The steering is a single cable type (Teleflex)
    Any pics of the setup would be handy.
    I have looked for the kit umpteen times,without any success.
    Part numbers would be handy,I live in the UK,so relevant part numbers would be useful if possible.
    Any help will be greatly appreciated. "V"
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.