Calculate ship's deflection

Discussion in 'Software' started by xhanasico, Jul 14, 2007.

  1. xhanasico
    Joined: May 2007
    Posts: 10
    Likes: 0, Points: 0, Legacy Rep: 9
    Location: Viet Nam

    xhanasico Junior Member

    I use Autohydro for stability calculation. Plz tell me how to export ship's deflection values. I used LS command but no deflection values presented.
  2. Thai
    Joined: Nov 2004
    Posts: 27
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: VietNam

    Thai Junior Member

    I not understand what you have posted. Please clearly again
  3. rickychen96
    Joined: Feb 2006
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: wuhan,cn

    rickychen96 Junior Member

    to xhanasico:
    I also have the same problem,can anybody help?
    to Thai:
    in Autohydro, use the command "LS" can get the report of the ship weight distribution, bending moment,etc. however, the deflection data is not shown.
  4. Ad Hoc
    Joined: Oct 2008
    Posts: 6,566
    Likes: 589, Points: 113, Legacy Rep: 2488
    Location: Japan

    Ad Hoc Naval Architect

    then calculate it by hand!

  5. happyguy
    Joined: Aug 2005
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: CHN

    happyguy Junior Member

    actually, you did not give autohydro even a real section with structure, how did she determin the deflection? deflection is relate to the bending moment AND the moment of inertia.
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.