Building Stern Outboards Support

Discussion in 'Materials' started by Cacciatore, Jul 25, 2016.

  1. Cacciatore
    Joined: Oct 2008
    Posts: 73
    Likes: 0, Points: 6, Legacy Rep: 10
    Location: Italy

    Cacciatore Junior Member

    Hi Guys , could you give me some advices to build the Stern Outboards Support in Grp building process ? Someone use solid wood or multilayer wood what is the best method ? I will prefer to use a material no perishable .Only PVC sheet foam could be ok ? Anyone could give me a lamination table of similar boat to have an overview ?

    Thank you in advance . Have a good day.

    [​IMG]
     
  2. TANSL
    Joined: Sep 2011
    Posts: 6,198
    Likes: 291, Points: 93, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    ISO 12215-6 standard establishes clear indications for how it should be the transom area supporting a outboard motor.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.