P-welting

Discussion in 'Materials' started by Lew Morris, Mar 26, 2002.

  1. Lew Morris
    Joined: Jun 2001
    Posts: 124
    Likes: 4, Points: 18, Legacy Rep: 92
    Location: Pismo Beach, Ca

    Lew Morris Industrial Designer

    i'm looking for vinyl extrusion to be placed between the edge of an interior bulkhead (actually a partition) and the interior of the cabin top -- the function anticipated is that of appearance, and to prevent squeeks...

    the boat under remodel is an '84 J-24. the origninal manufacturers material is no longer available, and in fact the current manufacturer has no supplier of this material (which i find hard to believe...).

    the configuration of the extrusion can generally be described as the letter "P". a "tadpole" shape (round with a tail on-center) would work as well.

    the length overall is about 1-1/8" and the diameter of the bulb is 7/16" -- the leg portion needs to be about 3/4".

    any leads would be appreciated

    Lew
     
    Lew Morris, Mar 26, 2002
    #1
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.