1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

Boat molds factory

Discussion in 'Boat Molds' started by v101, Jun 6, 2016.

  1. v101
    Joined: Aug 2012
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Brazil

    v101 New Member

    Email sent.
     
  2. ags
    Joined: Mar 2017
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Canada

    ags New Member

  3. SchmidtyBoats
    Joined: Mar 2017
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Jupiter Fl

    SchmidtyBoats New Member

    May need a mold made

    Looking to build a flats boat and make a couple. What would you need and approximately how much are we looking at for hull and cap molds. Would like to build a 18ft flats / 22ft / and 27bay /32 bay. Would like to start with the 18 ft. thank you
     
  4. mxpro241
    Joined: May 2017
    Posts: 0
    Likes: 0, Points: 0
    Location: california

    mxpro241 New Member

    interested in your mold or having one made can you please email me photos of what you have as well as your contact info my email is mxpro241@gmail.com
     
  5. ercraig
    Joined: Apr 2017
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ohio

    ercraig New Member

    What size molds do you have and what condition are they in? Looking for any molds 24'-50'.
     
  6. Fishnhunter
    Joined: May 2017
    Posts: 0
    Likes: 0, Points: 0
    Location: Charleston

    Fishnhunter New Member

  7. Quinnhp
    Joined: Mar 2017
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Victoria British Columbia

    Quinnhp New Member

    Looking to have a hull mold built, two pieces, lots of sheer, tumble home in stern quarters. 408 sq feet of hull surface area. Flanges on molds need to be wide enough for infusion bagging.
    Can you give me a loose cost per square foot on a finished mold sanded and polished to 2000 grit?
    Quinnhp@yahoo.ca
     

  8. eddie1681
    Joined: Apr 2015
    Posts: 2
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Sea

    eddie1681 New Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.