Best rough water hull you know.

Discussion in 'Powerboats' started by xarax, Aug 5, 2006.

  1. Willallison
    Joined: Oct 2001
    Posts: 3,590
    Likes: 130, Points: 0, Legacy Rep: 2369
    Location: Australia

    Willallison Senior Member

    It was a beutifulday yesterday, and I spent it at work.
    I thought that was a bit bloody rough:D

    Sorry, couldn't help myself...
     
  2. gbaaron
    Joined: Jun 2004
    Posts: 23
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: MI

    gbaaron Junior Member

    How about this one;)
     

    Attached Files:

  3. kach22i
    Joined: Feb 2005
    Posts: 2,418
    Likes: 111, Points: 63, Legacy Rep: 1222
    Location: Michigan

    kach22i Architect

  4. Chris Ostlind

    Chris Ostlind Previous Member

    Quote

    Not to be too obtuse about it all, Ike, but isn't your favorite signature quote really from the lips of one, Robert A. Heinlein and not Heinlien as you indicate?
     
  5. xarax

    xarax Previous Member

    To MadMat,

    Heavy chop is probably close to what I had in mind. The height of the waves varies a lot, so that the hull can not travel in a straight horizontal line without hitting some of them really hard!
     
  6. buckknekkid
    Joined: Oct 2005
    Posts: 345
    Likes: 4, Points: 0, Legacy Rep: 37
    Location: north of pompano

    buckknekkid Senior Member

    I built this

    Race Proven, goes like stink and doesnt slow down in 6's outside.
     

    Attached Files:

  7. longliner45
    Joined: Dec 2005
    Posts: 1,629
    Likes: 73, Points: 0, Legacy Rep: 505
    Location: Ohio

    longliner45 Senior Member

    31ft jc boats from NewEngland,,,,,,,,by the way .those speed boats wont cut it
     
  8. buckknekkid
    Joined: Oct 2005
    Posts: 345
    Likes: 4, Points: 0, Legacy Rep: 37
    Location: north of pompano

    buckknekkid Senior Member

    Xarax, go to Bar Montenegro, nose around the docks a bit, there have been many boats designed and built in the last decade A: for the contrabandos to out run the Feds, B; for the Feds to out run the contrabandos. see who is winning this year and then build those boats. Best bet in your neighborhood is Buzzi http://fbdesign.it/b55.php
     

    Attached Files:

  9. Verytricky
    Joined: Oct 2005
    Posts: 248
    Likes: 17, Points: 0, Legacy Rep: 400
    Location: London

    Verytricky Large Member

    Occe Mannefeld. I have one of his B24's ( v24 in the UK )

    In the flat I do 76's in the rough I do 78's!
     
  10. buckknekkid
    Joined: Oct 2005
    Posts: 345
    Likes: 4, Points: 0, Legacy Rep: 37
    Location: north of pompano

    buckknekkid Senior Member


    I believe you , GREAT design!!!!!!:D sorta like a CUV or mini COUGAR
     
  11. YankeeBoater
    Joined: Oct 2005
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Newburyport, MA

    YankeeBoater Junior Member

    Rough water planers

    For steep chop and a planing hull, owners report high satisfaction with these commercially available open boats, all of which have moderate length/beam ratios:

    The Albin 26 (a deep vee inboard, 3:1 length/beam):
    http://www.albinmarine.com/ExpressTrawler/ExpressTrawler.html

    The Regulator (a deep vee outboard, 3:1 length/beam):
    http://www.regulatormarine.com/29.html#

    The Panga (outboard or inboard, 4:1 length/beam, fine entry, but flatter aft):
    http://www.panga.com/pangaboats/panga27/

    ...and a number of outboard powered catamarans, like the Twin Vee
    http://www.twinvee.net/Default.aspx?tabid=121
    ...or the Glacier Bay
    http://www.glacierbaycats.com/lineup_2665_cr.html
     
  12. kach22i
    Joined: Feb 2005
    Posts: 2,418
    Likes: 111, Points: 63, Legacy Rep: 1222
    Location: Michigan

    kach22i Architect

  13. YankeeBoater
    Joined: Oct 2005
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Newburyport, MA

    YankeeBoater Junior Member

    Just going by what I have read and heard here. I think the cats are the smoothest running at speed in light-medium waves/chop, because the frontal area on these is very small - they can in fact actually run smoother at higher speeds rather than lower, because planing lifts them up to clear the waves from the 'tunnel'. But, once the waves get large enough to 'bottom out' that tunnel, you really need to slow down a lot, and would be better off in one of the monohull boats.
     
  14. kach22i
    Joined: Feb 2005
    Posts: 2,418
    Likes: 111, Points: 63, Legacy Rep: 1222
    Location: Michigan

    kach22i Architect

    Thanks, I just hate getting caught out there in any sized or type of craft in rough water. It's no fun, and it always happens when my bladder is full.:p
     

  15. Verytricky
    Joined: Oct 2005
    Posts: 248
    Likes: 17, Points: 0, Legacy Rep: 400
    Location: London

    Verytricky Large Member

    Cats dont seem to do well in the typical English sea conditions. They do very well in places like Italy.

    They do seem to have short 'bursts' of speed, and then collapse - the variation is as much as 15 mph. It also depends on wind speed and wind direction! If the wind is from behind and fast the cats are useless...
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.