Mercruiser Leg

Discussion in 'Sterndrives' started by mikealston2428, Jul 25, 2011.

  1. mikealston2428
    Joined: Jul 2011
    Posts: 203
    Likes: 1, Points: 18, Legacy Rep: 10
    Location: aussie

    mikealston2428 Senior Member

    Hi there,

    Please see attached.

    Can you please tell me what Mercruiser leg this is ?

    The decals are Alpha 1.

    I had to replace the trim cylinders, they were Mercruiser MC1 parts.

    The serial number plate has no numbers on it.

    Your help is greatly appreciated.

    Thank you,
    Mike
     

    Attached Files:

  2. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    It is an Alpha 1 like the decals say
     
  3. IMP-ish
    Joined: Jan 2011
    Posts: 389
    Likes: 9, Points: 18, Legacy Rep: 150
    Location: united states of america

    IMP-ish powerboater

    It doesn't look like an alpha 1 to me - it looks pre-alpha-1. The anti-cavitation plate is rounded at the back instead of squared off (hard to see with the tail added) The upper unit has ridges by the vent screw (where this one has a lube attachment added.) The top plate has a lift ring.
     
  4. powerabout
    Joined: Nov 2007
    Posts: 2,944
    Likes: 67, Points: 48, Legacy Rep: 719
    Location: Melbourne/Singapore/Italy

    powerabout Senior Member

    agree its pre alpha
    the decals are not from that design
    so some time after 76
     
  5. mikealston2428
    Joined: Jul 2011
    Posts: 203
    Likes: 1, Points: 18, Legacy Rep: 10
    Location: aussie

    mikealston2428 Senior Member

    its a MC1

    I removed the decal on the port side were the serial number for the MC1 should be and yep the is a number there, cant read all the numbers.
    498 then i think 863.

    there is also a 8 stamp by it self off to the side.

    Mike
     
  6. powerabout
    Joined: Nov 2007
    Posts: 2,944
    Likes: 67, Points: 48, Legacy Rep: 719
    Location: Melbourne/Singapore/Italy

    powerabout Senior Member

    This version came out when merc converted to 100% chev v8s
    Only difference in drives for that era was the ratio in the top box to suit the engine it came with.
     
  7. mikealston2428
    Joined: Jul 2011
    Posts: 203
    Likes: 1, Points: 18, Legacy Rep: 10
    Location: aussie

    mikealston2428 Senior Member

    thanks for info, approx what year is this unit ?
     
  8. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    You are right, it is an MR1
     
  9. powerabout
    Joined: Nov 2007
    Posts: 2,944
    Likes: 67, Points: 48, Legacy Rep: 719
    Location: Melbourne/Singapore/Italy

    powerabout Senior Member

    its not an MR its earlier maybe even 1976 when that style transom bracket came out.
     
  10. CDK
    Joined: Aug 2007
    Posts: 3,324
    Likes: 148, Points: 63, Legacy Rep: 1819
    Location: Adriatic sea

    CDK retired engineer

    I agree with powerabout. The central grease nipple and the lifting eye on the top cover suggest it is a real museum piece. Or it has been built from various bits and pieces from a scrapyard.
     
  11. powerabout
    Joined: Nov 2007
    Posts: 2,944
    Likes: 67, Points: 48, Legacy Rep: 719
    Location: Melbourne/Singapore/Italy

    powerabout Senior Member

    its not that old, it has got rotary trim/limit switches so i'd still own one.
    They celebrated the 1,000,000th stern drive shipped in 76 ( I think) it was a good year.
    Can have a later MR lower housing with alpha parts if you have it it a heavy boat with a v8
     
  12. IMP-ish
    Joined: Jan 2011
    Posts: 389
    Likes: 9, Points: 18, Legacy Rep: 150
    Location: united states of america

    IMP-ish powerboater

    I wonder how many alpha drives they have sold now?!
    Amazing how close even the genII alpha is to this 30+ year old drive. Simplicity, mass production, parts availability, economics...
     
  13. whitepointer23

    whitepointer23 Previous Member

    and still only half as good as a volvo.
     
  14. IMP-ish
    Joined: Jan 2011
    Posts: 389
    Likes: 9, Points: 18, Legacy Rep: 150
    Location: united states of america

    IMP-ish powerboater

    Or the bravo.
    It must come down to economics - the McDonald's effect.
    Yes the alpha has slightly less drag than the bravo for small boats. But I don't know any boat owner who would choose an alpha over a bravo with smoother shifting and better durability if they ran both. I can't find current sales figures, yet I suspect the alpha still outsells the bravo and more expensive and better drives. The original engineers apparently nailed the engineering:economy ratio.
     

  15. CDK
    Joined: Aug 2007
    Posts: 3,324
    Likes: 148, Points: 63, Legacy Rep: 1819
    Location: Adriatic sea

    CDK retired engineer

    It is of course marketing strategy that made Mercruiser the main operator in the stern drive market. If quality or longevity was a decisive factor, Volvo would have had the largest share, followed by BMW and OMC.
    Marketing is a much more powerful instrument than good engineering. Even when Mercruiser made a cheaper version of their original product, they called it genII and presented it as a superior product, while in fact the changes were minimal, like bolts and nuts instead of threaded holes, internal bores for the speedometer pick-up and a cheaper way to attach the trim cylinders and the upper bellows.

    Yanmar entered the stern drive market a couple of years ago with a splendidly designed duo prop drive, featuring hydraulic gear shifting and a smooth, low drag housing. They sell it with their excellent diesel engines for only a few 100's of dollars more than a Bravo-2, but I still haven't seen a single one in our marinas.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.