BBW Jumbo Challenger Yak build

Discussion in 'Wooden Boat Building and Restoration' started by txriverrat, Mar 24, 2011.

  1. txriverrat
    Joined: Sep 2010
    Posts: 165
    Likes: 12, Points: 0, Legacy Rep: 159
    Location: Texas

    txriverrat Senior Member

    Installing the shear strips , man it sure does shape a boat up

    [​IMG]

    [​IMG]
    Ron
     
  2. txriverrat
    Joined: Sep 2010
    Posts: 165
    Likes: 12, Points: 0, Legacy Rep: 159
    Location: Texas

    txriverrat Senior Member

    Got the bulkheads tacked in and about half of the decks run.

    [​IMG]

    [​IMG]
    Going to look like a boat before long
    Ron
     
  3. txriverrat
    Joined: Sep 2010
    Posts: 165
    Likes: 12, Points: 0, Legacy Rep: 159
    Location: Texas

    txriverrat Senior Member

    Got most of the decks striped today ,

    [​IMG]

    [​IMG]
    about one more hour and they will be glued up.
    Ron
     
  4. txriverrat
    Joined: Sep 2010
    Posts: 165
    Likes: 12, Points: 0, Legacy Rep: 159
    Location: Texas

    txriverrat Senior Member

    Finally got the decks striped out and sanded

    [​IMG]
    I am like this .

    Wet the decks down for a preview of the look.

    [​IMG]

    [​IMG]

    Oh yea now I am getting pumped over this rig.
    Ron
     
  5. cthippo
    Joined: Sep 2010
    Posts: 813
    Likes: 52, Points: 28, Legacy Rep: 465
    Location: Bellingham WA

    cthippo Senior Member

    Awesome work, TX. I love the wood pattern on the deck on that, and the two boats look really good together.
     
  6. txriverrat
    Joined: Sep 2010
    Posts: 165
    Likes: 12, Points: 0, Legacy Rep: 159
    Location: Texas

    txriverrat Senior Member

    Decks glued down ,
    [​IMG]

    Gunnels from white pine glued on

    [​IMG]

    This should take care of the structural part now she will start getting dolled up and looking good.
    Ron
     
    1 person likes this.
  7. lumberjack_jeff
    Joined: Oct 2010
    Posts: 101
    Likes: 12, Points: 0, Legacy Rep: 99
    Location: Washington State

    lumberjack_jeff Sawdust sweeper

    This is extraordinarily nice. I made a cedar strip Wee Lassie, but I like your chine technique a lot.
     
  8. txriverrat
    Joined: Sep 2010
    Posts: 165
    Likes: 12, Points: 0, Legacy Rep: 159
    Location: Texas

    txriverrat Senior Member

    It seems to work well and a lot of folks are going to it. Cheaper than marine ply , looks of a strip built.
    Ron
     
  9. txriverrat
    Joined: Sep 2010
    Posts: 165
    Likes: 12, Points: 0, Legacy Rep: 159
    Location: Texas

    txriverrat Senior Member

    Decks with cloth on them.

    [​IMG]

    Starting to get a little shine with the first fill coat

    [​IMG]

    Ron
     
  10. txriverrat
    Joined: Sep 2010
    Posts: 165
    Likes: 12, Points: 0, Legacy Rep: 159
    Location: Texas

    txriverrat Senior Member

    Getting some fill coats on her

    [​IMG]

    She is starting to get that finish I want now,put the cloth reinforcements on the bow and stern

    [​IMG]

    Slick it up a little more and then shoot the varnish on her , should shine like a new penny.
    Ron
     
  11. gypsy28
    Joined: Mar 2010
    Posts: 218
    Likes: 26, Points: 28, Legacy Rep: 120
    Location: NSW Australia

    gypsy28 Senior Member

    absolutely gorgeous, very nice work
     
  12. rwatson
    Joined: Aug 2007
    Posts: 6,166
    Likes: 495, Points: 83, Legacy Rep: 1749
    Location: Tasmania,Australia

    rwatson Senior Member

    I find the sharp, non flowing bow really upsetting to my sense of aesthetics, and probably the boats performance.

    I know you have gone off plywood, but you could do something like this with planks.
     

    Attached Files:

    • Bow.jpg
      Bow.jpg
      File size:
      32.4 KB
      Views:
      552
  13. txriverrat
    Joined: Sep 2010
    Posts: 165
    Likes: 12, Points: 0, Legacy Rep: 159
    Location: Texas

    txriverrat Senior Member

    Watson
    I will post another boat I built , it is the highest performance boat I own, it would really upset you, lol. This boat is a river style boat and jumping logs, running up on rocks this configuration out preforms the rounded shape. I AM NOT A PURIST, as you have noticed.
    I build for the best performance for the location and use of the boat. I call it location sensitive building.
    I do own several like you posted and was not pleased with there performance.
    Ron
     
  14. txriverrat
    Joined: Sep 2010
    Posts: 165
    Likes: 12, Points: 0, Legacy Rep: 159
    Location: Texas

    txriverrat Senior Member

    [​IMG]
    This boat will fly and handles the wind better than any boat with a turned up nose.
    Ron
     
    1 person likes this.

  15. cthippo
    Joined: Sep 2010
    Posts: 813
    Likes: 52, Points: 28, Legacy Rep: 465
    Location: Bellingham WA

    cthippo Senior Member

    It may have something to do with intended use. I think the advantage of the upturned nose is to help cope with waves be beginning to life the boat over them rather than plowing straight through. From what you've said, you do most of your paddling on flat water so it wouldn't be advantageous.

    I think marketing also plays a part. People think the sloping bows look "faster".
     
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.