how bad an idea: PWC jet to surface drive

Discussion in 'Propulsion' started by srimes, Sep 21, 2008.

  1. srimes
    Joined: Sep 2008
    Posts: 283
    Likes: 30, Points: 28, Legacy Rep: 214
    Location: Oregon

    srimes Senior Member

    So this probably dangerious idea popped into my head. PWCs (jet skis, waverunners, etc.) are quite slow for the power/weight/size, mainly because of the jet pump. What if you pulled the jet and put in a surface drive? Wicked fast and a rooster tail to boot!

    Ignoring the obvious danger of the prop, could it be safe? Or would the single surface piercing prop cause too much side thrust to be stable? Would two props be necessary?

    Also, how fast would it be?
     
  2. pkoken
    Joined: Mar 2003
    Posts: 96
    Likes: 2, Points: 0, Legacy Rep: 43
    Location: Cruising Hawaii

    pkoken S/V Samadhi V

    Use the search, it is your friend.

    Someone has already started down this path...
     
  3. dd24skater
    Joined: Oct 2007
    Posts: 17
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ohio

    dd24skater Junior Member

    Saw some pictures and numbers a while back.....very fast and looks very dangerous!!!!

    Dd
     
  4. Kay9
    Joined: Oct 2006
    Posts: 589
    Likes: 26, Points: 0, Legacy Rep: 279
    Location: Central Coast Oregon US.

    Kay9 1600T Master

    It slices it dices it juliets. It will decrease your time from water to hospital to under 4 mins.

    K9
     
  5. FAST FRED
    Joined: Oct 2002
    Posts: 4,519
    Likes: 111, Points: 63, Legacy Rep: 1009
    Location: Conn in summers , Ortona FL in winter , with big d

    FAST FRED Senior Member

    Sure will be hard to care for a boat that can't be beached.

    FF
     

  6. tom kane
    Joined: Nov 2003
    Posts: 1,768
    Likes: 49, Points: 58, Legacy Rep: 389
    Location: Hamilton.New Zealand.

    tom kane Senior Member

    propellers usually have to have rudders to steer,but rudders only give you about 10 to 13 degrees of steering each way from centre,even less at speed.A rudder gets into a stall position each way past 10 degrees from centre and becomes a big drag with loss of control.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.