New boat

Discussion in 'Boat Design' started by ktamsor2, Mar 23, 2015.

  1. ktamsor2
    Joined: Mar 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    ktamsor2 Junior Member

    [​IMG]

    This is the pontoon boat I recently bought. I'll add a few more pics to show original condition, then more to show it now. I'm planning to put a cabin on it, but haven't gotten to it yet.

    28' Lowe Pontoon
     
  2. ktamsor2
    Joined: Mar 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    ktamsor2 Junior Member

    Old view

    [​IMG]

    [​IMG]
     
  3. ktamsor2
    Joined: Mar 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    ktamsor2 Junior Member

    Old view

    [​IMG]
     
  4. ktamsor2
    Joined: Mar 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    ktamsor2 Junior Member

    Ok, now the current look.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  5. ktamsor2
    Joined: Mar 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    ktamsor2 Junior Member

    test run

    This is not the official launch. Just a test run.

    [​IMG]
     
  6. ktamsor2
    Joined: Mar 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    ktamsor2 Junior Member

    this is what I'm thinking of doing to it.

    [​IMG]
     
  7. messabout
    Joined: Jan 2006
    Posts: 3,368
    Likes: 511, Points: 113, Legacy Rep: 1279
    Location: Lakeland Fl USA

    messabout Senior Member

    Add superstructure (a house) carefully. You are aware that the house will add a lot of unwelcome windage, your cruising speed will be lower, The extra weight will change the normal draft, your fuel consumption will increase also.

    The boat in the last picture appears to have a conventional aluminum patio room with a canopy. That's a quick, easy, and economical way to do it. That structure is about as light weight as it gets. It won't be so light a weight conversion if you get carried away with luxurious amenities for the cabin.

    As for windage disadvantage it depends largely on where and when you use the boat. Maybe not on Galveston Bay, Corpus Christi Bay, or other big water and never in threatening weather.

    Enjoy.
     
  8. ktamsor2
    Joined: Mar 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    ktamsor2 Junior Member

    Yeah, I understand that. I intend to make it a small cabin, no longer than 10' by the width of the boat. Just mainly a toilet, kitchenette, and dinette, with the stearing wheel inside as well. The dinette will convert into a bed. With the heat as bad as it get's in Texas, I have to have AC, so the bank of batteries will go in the back and solar panels on the roof. Shouldn't have any problem running AC all night if I have to. The frame is going to be aluminimun and be insulated with marine foam insulation (I'm hoping I'm saying it right). Anyway, not too shabby for a girl huh?
     
  9. messabout
    Joined: Jan 2006
    Posts: 3,368
    Likes: 511, Points: 113, Legacy Rep: 1279
    Location: Lakeland Fl USA

    messabout Senior Member

    You go girl! I mean that. Girls can do boat stuff too, They have even sailed around the world solo.

    By the way if you are going to be a sea dog, then a toilet is called a head.
     
    Last edited: Mar 24, 2015

  10. ktamsor2
    Joined: Mar 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: United States

    ktamsor2 Junior Member

    LOL, I stand corrected. Should have remembered that.

    :D
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.