Rhinoceros

Discussion in 'Boat Design' started by sunadria, Mar 24, 2010.

  1. sunadria
    Joined: May 2009
    Posts: 4
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: croatia

    sunadria New Member

    Hello there!

    I'm beginer at RHINOCEROS.Does anybody have some tutorials how to
    make a hull design for yacht or superyacht?
    Mario from Croatia:)
     
    sunadria, Mar 24, 2010
    #1
  2. Milan
    Joined: Apr 2005
    Posts: 317
    Likes: 24, Points: 18, Legacy Rep: 279
    Location: The Netherlands

    Milan Senior Member

    Milan, Mar 24, 2010
    #2
  3. sunadria
    Joined: May 2009
    Posts: 4
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: croatia

    sunadria New Member

    Hi Milan,there is a lot to read,hope I'l find something where to begin.Thanks for answering...
     
    sunadria, Mar 24, 2010
    #3
  4. Chris Ostlind

    Chris Ostlind Previous Member

    Professional Boatbuilder Magazine www.proboat.com is going to start an online class very soon that is all about using Rhino to design boats. You might want to get yourself enrolled and get it straight from one of the guys who knows his stuff, Cliff Estes.

    This link is for the class that just ended... http://rhino0901.eventbrite.com/
    but you can get enrolled for the next class which is scheduled for May 2, of this year.
     
    Chris Ostlind, Mar 24, 2010
    #4
  5. Tad
    Joined: Mar 2002
    Posts: 2,321
    Likes: 214, Points: 73, Legacy Rep: 2281
    Location: Flattop Islands

    Tad Boat Designer

    Tad, Mar 24, 2010
    #5
  6. mjboats
    Joined: Mar 2010
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Minnesota

    mjboats Junior Member

    Well one way you can do it, that works well is to create hull section or create you line of your boat, and them just simply create a surface using your curves. (if you go to the surface command there are 4-5 different options, like curve network, corner points, edge points) just read the instruction in the text menu bar and it should work for ya,For a beginner that is probally the easiest....
    Good Luck
    MjBoats-Rhino user
     
    mjboats, Mar 26, 2010
    #6

  8. zeroname
    Joined: Oct 2008
    Posts: 276
    Likes: 5, Points: 0, Legacy Rep: 90
    Location: Europe

    zeroname Naval Architect

    As you are a beginner , so learn first the basic ,, if u already know autocad then it will be very easy for you . you can find from their website www.rhino3d.com two kinds of training guide , Level 1 and Level 2 , that will help u much ,
     
    zeroname, Mar 27, 2010
    #7
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.