1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

33' boat molds for sale

Discussion in 'Boat Molds' started by Allmand Boats, Aug 17, 2002.

  1. Allmand Boats
    Joined: Aug 2002
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: miami, fl

    Allmand Boats Junior Member

    33' deep vee offshore open fisherman boat molds for sale unique design see the boats made on the home page of allmandboats.com $25,000 to the first buyer, molds are in great shape, new design made in 1999:) call or email allmandboats@yahoo if interested, these boats made from the molds are very dry and fast, made to ride smooth in offshore conditions.
     
  2. Nomad
    Joined: Feb 2002
    Posts: 462
    Likes: 1, Points: 0, Legacy Rep: 12
    Location: Perry, Florida

    Nomad Mold Trader/Boat Builder

    What kind of speed does it run with the power show in the photos? Looks sharp! Why are you selling the molds?
     
  3. Nomad
    Joined: Feb 2002
    Posts: 462
    Likes: 1, Points: 0, Legacy Rep: 12
    Location: Perry, Florida

    Nomad Mold Trader/Boat Builder

    Also what is the beam?
     
  4. Allmand Boats
    Joined: Aug 2002
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: miami, fl

    Allmand Boats Junior Member

    beam is 9'6". we are developing a longer version with an integreted transom, with a step hull.thats why they are for sale
     
  5. Nomad
    Joined: Feb 2002
    Posts: 462
    Likes: 1, Points: 0, Legacy Rep: 12
    Location: Perry, Florida

    Nomad Mold Trader/Boat Builder

    The reason for the question was I was suprised that you were selling such new molds, after having them built youself was the real shocker.
     
  6. vassiliadis
    Joined: Feb 2003
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Greece

    vassiliadis New Member

    I am looking for info about an 80 feet mold (for yacht)
    Does anyone know something?
     
  7. Allmand Boats
    Joined: Aug 2002
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: miami, fl

    Allmand Boats Junior Member

    An 80 foot mold would cost about $1,250,000 to build
     
  8. Nomad
    Joined: Feb 2002
    Posts: 462
    Likes: 1, Points: 0, Legacy Rep: 12
    Location: Perry, Florida

    Nomad Mold Trader/Boat Builder

    Likely to be more
     
  9. vassiliadis
    Joined: Feb 2003
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Greece

    vassiliadis New Member

    If the cost for a 80 foot mold is the $ 1,250,000 than it is not
    proper for me. I can build to ships for that money.
     
  10. Nomad
    Joined: Feb 2002
    Posts: 462
    Likes: 1, Points: 0, Legacy Rep: 12
    Location: Perry, Florida

    Nomad Mold Trader/Boat Builder

    Unless you but used molds then you might find a deal.
     
  11. Allmand Boats
    Joined: Aug 2002
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: miami, fl

    Allmand Boats Junior Member

    Nomad, what do you do all days? watch this message board and send a reply to every ad hoping to get a lead? The message was sent to me to answer ad not you.
     
  12. Allmand Boats
    Joined: Aug 2002
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: miami, fl

    Allmand Boats Junior Member

    I'd like to respond to the mesages without having someone butt in first
     
  13. Nomad
    Joined: Feb 2002
    Posts: 462
    Likes: 1, Points: 0, Legacy Rep: 12
    Location: Perry, Florida

    Nomad Mold Trader/Boat Builder

    Sorry, just giving advice, in many instances people will come into a thread about any mold and ask about a off the subject mold. Seeing that is was posted on the forum and not emailed one would think that he was asking the whole forums advice.

    Sorry again


    Also were you contacted by Carlos from Plam Beach last week?? I told him to E-Mail you, He was intrested in a mold of that style but alittle smaller, not sure if he was still intrested or if he found something else.
     
  14. Willallison
    Joined: Oct 2001
    Posts: 3,590
    Likes: 127, Points: 0, Legacy Rep: 2369
    Location: Australia

    Willallison Senior Member

    :eek:
    Good answer Nomad ! Time for someone to eat a little humble GRP.....

    incidentally what's a but mold......

    :D :D :D
     

  15. vassiliadis
    Joined: Feb 2003
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Greece

    vassiliadis New Member

    This message is for Allmand Boats. Is there a better fhoto of the mold that you are about to shell?
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.